44 lines
2.3 KiB
Markdown
44 lines
2.3 KiB
Markdown
# Solidworks
|
|
|
|
Hints and support files for working with Solidworks at Reykjavik University
|
|
|
|
# Hints
|
|
|
|
## How do I place multiple instances of a part into an assembly
|
|
Reference: https://help.solidworks.com/2020/english/SolidWorks/sldworks/t_Inserting_Components_One_at_a_Time.htm?id=8.1.1.0.0
|
|
1. Pin the PropertyManager
|
|
|
|
## Solidworks keeps putting too many parts on the Bill of Materials, how do I exclude them?
|
|
Reference: https://mechanitec.ca/how-to-exclude-part-from-bom-solidworks/
|
|
1. Select the parts
|
|
1. Right-click and choose "Component Properties" which might be an icon on the top right bar
|
|
1. Check "Exclude from bill of materials" then click "OK"
|
|
|
|
## The Bill of Materials shows a part, but not it's configuration name
|
|
This turns out to be a bit of work as shown in https://help.solidworks.com/2021/English/SolidWorks/sldworks/c_Bill_of_Materials_Multiple_Configurations.htm
|
|
1. Open the Configuration Manager
|
|
1. Rename the configuration what you want to show up such as "Lockwasher-M4"
|
|
1. Right-click that configuration and pick "Properties"
|
|
1. Under "Bill of Materials Options" set Part number displayed when used in a bill of materials to "Configuration Name"
|
|
1. Click OK
|
|
|
|
## How do I change the appearance of all Configurations?
|
|
Reference https://knowledge.cadimensions.com/hubfs/KB%20Reference%20Docs/SOLIDWORKS%20Appearance%20Cheat%20Sheet.pdf?hsLang=en
|
|
1. Right-click on the part in the Part tree and choose the "Appearances" icon which is a multi-colored sphere with a pencil
|
|
1. Pick the part in question
|
|
1. Scroll down to "Display States (linked)" and make sure "All display states" is checked
|
|
1. Drag and drop the Appearances on the part
|
|
|
|
## How do I make an exploded view
|
|
Reference: https://help.solidworks.com/2026/English/SolidWorks/sldworks/t_Creating_Exploded_Views.htm
|
|
1. Open the part or assembly, NOT THE DRAWING
|
|
1. Insert > Exploded View
|
|
1. Pick parts then drag them apart using the X-Y-Z arrows
|
|
1. Save the step
|
|
1. When you are done, click the green checkbox
|
|
1. These exploded views are saved in the Configurations tab under the current Configuration
|
|
1. You will have to expand the configuration to see the saved Exploded view to open it again or rename it.
|
|
|
|
## How do I move features around without them going into assemblies on the tree?
|
|
Select them, then drag them with ALT pressed.
|