made encoder work for zephyr

.gitignore

@@ -7,3 +7,43 @@ Thumbs.db
 .vscode/c_cpp_properties.json
 .vscode/launch.json
 .vscode/ipch
+.pio
+
+build/CMakeCache.txt
+build/CMakeFiles/cmake.check_cache
+build/CMakeFiles/CMakeOutput.log
+build/CMakeFiles/3.20.21032501-MSVC_2/CMakeCCompiler.cmake
+build/CMakeFiles/3.20.21032501-MSVC_2/CMakeCXXCompiler.cmake
+build/CMakeFiles/3.20.21032501-MSVC_2/CMakeDetermineCompilerABI_C.bin
+build/CMakeFiles/3.20.21032501-MSVC_2/CMakeDetermineCompilerABI_CXX.bin
+build/CMakeFiles/3.20.21032501-MSVC_2/CMakeRCCompiler.cmake
+build/CMakeFiles/3.20.21032501-MSVC_2/CMakeSystem.cmake
+build/CMakeFiles/3.20.21032501-MSVC_2/VCTargetsPath.txt
+build/CMakeFiles/3.20.21032501-MSVC_2/VCTargetsPath.vcxproj
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/CMakeCCompilerId.c
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/CompilerIdC.exe
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/CompilerIdC.vcxproj
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/Debug/CMakeCCompilerId.obj
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/Debug/CompilerIdC.exe.recipe
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/Debug/CompilerIdC.tlog/CL.command.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/Debug/CompilerIdC.tlog/CL.read.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/Debug/CompilerIdC.tlog/CL.write.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/Debug/CompilerIdC.tlog/CompilerIdC.lastbuildstate
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/Debug/CompilerIdC.tlog/link.command.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/Debug/CompilerIdC.tlog/link.read.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdC/Debug/CompilerIdC.tlog/link.write.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/CMakeCXXCompilerId.cpp
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/CompilerIdCXX.exe
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/CompilerIdCXX.vcxproj
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/Debug/CMakeCXXCompilerId.obj
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/Debug/CompilerIdCXX.exe.recipe
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/Debug/CompilerIdCXX.tlog/CL.command.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/Debug/CompilerIdCXX.tlog/CL.read.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/Debug/CompilerIdCXX.tlog/CL.write.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/Debug/CompilerIdCXX.tlog/CompilerIdCXX.lastbuildstate
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/Debug/CompilerIdCXX.tlog/link.command.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/Debug/CompilerIdCXX.tlog/link.read.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/CompilerIdCXX/Debug/CompilerIdCXX.tlog/link.write.1.tlog
+build/CMakeFiles/3.20.21032501-MSVC_2/x64/Debug/VCTargetsPath.recipe
+build/CMakeFiles/3.20.21032501-MSVC_2/x64/Debug/VCTargetsPath.tlog/VCTargetsPath.lastbuildstate
+build/.cmake/api/v1/query/client-vscode/query.json

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/README.md

@@ -0,0 +1,38 @@
+..  Copyright 2019-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+How to build PlatformIO based project
+=====================================
+
+1. [Install PlatformIO Core](https://docs.platformio.org/page/core.html)
+2. Download [development platform with examples](https://github.com/platformio/platform-ststm32/archive/develop.zip)
+3. Extract ZIP archive
+4. Run these commands:
+
+```shell
+# Change directory to example
+$ cd platform-ststm32/examples/zephyr-blink
+
+# Build project
+$ pio run
+
+# Upload firmware
+$ pio run --target upload
+
+# Build specific environment
+$ pio run -e blackpill_f103c8
+
+# Upload firmware for the specific environment
+$ pio run -e blackpill_f103c8 --target upload
+
+# Clean build files
+$ pio run --target clean
+```

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/docs/diagrams/part1_state.wsd

@@ -0,0 +1,21 @@
+@startuml
+
+[*] --> Initialization
+
+state Initialization
+state Operational
+
+Initialization : entry / initialize parameters
+Initialization : entry / send Boot-up
+Initialization : do / wait for command
+
+Operational : entry / enable motor control
+Operational : entry / LED ON
+Operational : do / update speed controller at 250 Hz
+Operational : exit / stop motor control
+Operational : exit / LED OFF
+
+Initialization --> Operational : set operational / 'o'
+Operational --> Initialization : reset / 'r'
+
+@enduml

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/docs/diagrams/part2_state.wsd

@@ -0,0 +1,30 @@
+@startuml
+
+[*] --> Initialization
+
+state Initialization
+state Operational
+state Stopped
+
+Initialization : entry / initialize parameters
+Initialization : entry / send Boot-up
+Initialization : do / wait for command
+
+Operational : entry / enable motor control
+Operational : entry / LED ON
+Operational : do / update speed controller at 250 Hz
+Operational : exit / stop motor control
+Operational : exit / LED OFF
+
+Stopped : entry / brake motor
+Stopped : entry / disable normal controller activity
+Stopped : do / LED blink at 2 Hz
+Stopped : exit / LED OFF
+
+Initialization --> Operational : set operational / 'o'
+Operational --> Initialization : reset / 'r'
+
+Operational --> Stopped : emergency stop / fault
+Stopped --> Initialization : reset / 'r'
+
+@enduml

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/docs/part3_test_plan.md

@@ -0,0 +1,23 @@
+# Part 3 - PI Controller TDD
+
+## Normal flows
+
+1. Zero error produces zero output.
+2. Positive error produces positive control output.
+3. Negative error produces negative control output.
+4. Constant error accumulates integral action.
+5. The PI controller operates through the common Controller interface.
+
+## Alternate flows
+
+1. Positive output is limited to +255.
+2. Negative output is limited to -255.
+3. Positive saturation does not cause integral windup.
+4. Negative saturation does not cause integral windup.
+5. The controller recovers correctly after saturation.
+6. Reset clears the accumulated integral.
+
+The tests were written and executed before the PI control law was
+implemented. The initial run produced the expected failing tests.
+After implementing the PI control law and anti-windup behavior,
+the same test suite passed all 11 tests.

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/README

@@ -0,0 +1,37 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the convention is to give header files names that end with `.h'.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/context.h

@@ -0,0 +1,32 @@
+#ifndef CONTEXT_H
+#define CONTEXT_H
+
+#include <state.h>
+
+class Context
+{
+public:
+    Context(State& initialState);
+
+    void transition_to(State& newState);
+
+    void do_work();
+
+    void reset();
+    void set_operational();
+    void set_pre_operational();
+    void fault();
+
+    void select_p();
+    void select_pi();
+
+    void set_kp(double value);
+    void set_ti(double value);
+
+    const char* current_state_name() const;
+
+private:
+    State* state;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/control_timer.h

@@ -0,0 +1,17 @@
+#ifndef CONTROL_TIMER_H
+#define CONTROL_TIMER_H
+
+#include <stdint.h>
+
+class Control_timer
+{
+public:
+    void init();
+
+    // Returns true once for every 4 ms control tick.
+    bool take_tick();
+
+    uint32_t tick_count() const;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/controller.h

@@ -0,0 +1,19 @@
+#ifndef CONTROLLER_H
+#define CONTROLLER_H
+
+class Controller
+{
+public:
+    virtual ~Controller() = default;
+
+    virtual double update(
+        double reference,
+        double actual
+    ) = 0;
+
+    virtual void reset() = 0;
+
+    virtual const char* name() const = 0;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/digital_in.h

@@ -0,0 +1,22 @@
+#ifndef DIGITAL_IN_H
+#define DIGITAL_IN_H
+
+#include <zephyr/drivers/gpio.h>
+
+class Digital_in
+{
+public:
+    // pin is the PORTB bit number:
+    // PB0 = D8, PB1 = D9, ..., PB5 = D13
+    Digital_in();
+
+    void init();
+
+    bool is_hi() const;
+    bool is_lo() const;
+
+private:
+    struct gpio_dt_spec pin;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/digital_out.h

@@ -0,0 +1,23 @@
+#ifndef DIGITAL_OUT_H
+#define DIGITAL_OUT_H
+
+#include <zephyr/drivers/gpio.h>
+
+class Digital_out
+{
+public:
+    // pin is the PORTB bit number:
+    // PB0 = D8, ..., PB5 = D13
+    Digital_out();
+
+    void init();
+
+    void set_hi();
+    void set_lo();
+    void toggle();
+
+private:
+    struct gpio_dt_spec pin;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/encoder.h

@@ -0,0 +1,30 @@
+#ifndef ENCODER_H
+#define ENCODER_H
+
+#include <stdint.h>
+#include <digital_in.h>
+#include <zephyr/drivers/gpio.h>
+
+class Encoder
+{
+public:
+    Encoder();
+
+    void init();
+    void update();
+
+    int32_t position() const;
+
+private:
+    static void callback(const struct device *port,struct gpio_callback *cb,uint32_t pins);
+
+    Digital_in c1;
+    Digital_in c2;
+
+    struct gpio_callback gpioCallback;
+
+    bool previousC1;
+    volatile int32_t count;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/initialization.h

@@ -0,0 +1,35 @@
+#ifndef INITIALIZATION_H
+#define INITIALIZATION_H
+
+#include <state.h>
+#include <speed_controller.h>
+#include <digital_out.h>
+
+class Initialization : public State
+{
+public:
+    Initialization(
+        Speed_controller& speedController,
+        Digital_out& statusLED
+    );
+
+    const char* name() const override;
+
+    void on_entry() override;
+    void on_do() override;
+    void on_exit() override;
+
+    void set_pre_operational_state(
+        State& preOperationalState
+    );
+
+private:
+    Speed_controller& speedController;
+    Digital_out& statusLED;
+
+    State* preOperationalState;
+
+    bool transitionPending;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/motor_driver.h

@@ -0,0 +1,26 @@
+#ifndef MOTOR_DRIVER_H
+#define MOTOR_DRIVER_H
+
+class Motor_driver
+{
+public:
+    void init();
+
+    // Range: -255 ... +255
+    void set_command(double command);
+
+    void coast();
+
+    void brake();
+
+    double command() const;
+
+private:
+    double currentCommand;
+
+    void enable_pwm_outputs();
+
+    unsigned char magnitude(double value) const;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/operational.h

@@ -0,0 +1,52 @@
+#ifndef OPERATIONAL_H
+#define OPERATIONAL_H
+
+#include <stdint.h>
+
+#include <state.h>
+#include <speed_controller.h>
+#include <digital_out.h>
+
+class Operational : public State
+{
+public:
+    Operational(
+        Speed_controller& speedController,
+        Digital_out& statusLED
+    );
+
+    const char* name() const override;
+
+    void on_entry() override;
+    void on_do() override;
+    void on_exit() override;
+
+    void reset() override;
+    void set_pre_operational() override;
+    void fault() override;
+
+    void set_initialization_state(
+        State& initializationState
+    );
+
+    void set_pre_operational_state(
+        State& preOperationalState
+    );
+
+    void set_stopped_state(
+        State& stoppedState
+    );
+
+private:
+    Speed_controller& speedController;
+    Digital_out& statusLED;
+
+    State* initializationState;
+    State* preOperationalState;
+    State* stoppedState;
+
+    uint8_t logCounter;
+    uint32_t sampleCounter;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/p_controller.h

@@ -0,0 +1,36 @@
+#ifndef P_CONTROLLER_H
+#define P_CONTROLLER_H
+
+#include <controller.h>
+
+class P_controller : public Controller
+{
+public:
+    explicit P_controller(
+        double kp
+    );
+
+    double update(
+        double reference,
+        double actual
+    ) override;
+
+    void reset() override;
+
+    const char* name() const override;
+
+    void set_kp(
+        double value
+    );
+
+    double get_kp() const;
+
+private:
+    double kp;
+
+    double limit(
+        double value
+    ) const;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/pi_controller.h

@@ -0,0 +1,42 @@
+#ifndef PI_CONTROLLER_H
+#define PI_CONTROLLER_H
+
+#include <controller.h>
+
+class PI_controller : public Controller
+{
+public:
+    PI_controller(
+        double kp,
+        double ti,
+        double timestep
+    );
+
+    double update(
+        double reference,
+        double actual
+    ) override;
+
+    void reset() override;
+
+    const char* name() const override;
+
+    void set_kp(double kp);
+    double get_kp() const;
+
+    void set_ti(double ti);
+    double get_ti() const;
+
+    double get_timestep() const;
+
+private:
+    double kp;
+    double ti;
+    double timestep;
+
+    double integral;
+
+    double limit(double value) const;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/pre_operational.h

@@ -0,0 +1,63 @@
+#ifndef PRE_OPERATIONAL_H
+#define PRE_OPERATIONAL_H
+
+#include <stdint.h>
+
+#include <state.h>
+#include <speed_controller.h>
+#include <digital_out.h>
+
+#include <p_controller.h>
+#include <pi_controller.h>
+
+class PreOperational : public State
+{
+public:
+    PreOperational(
+        Speed_controller& speedController,
+        Digital_out& statusLED,
+        P_controller& pController,
+        PI_controller& piController
+    );
+
+    const char* name() const override;
+
+    void on_entry() override;
+    void on_do() override;
+    void on_exit() override;
+
+    void reset() override;
+    void set_operational() override;
+
+    void select_p() override;
+    void select_pi() override;
+
+    void set_kp(double value) override;
+    void set_ti(double value) override;
+
+    void set_initialization_state(
+        State& initializationState
+    );
+
+    void set_operational_state(
+        State& operationalState
+    );
+
+private:
+    Speed_controller& speedController;
+    Digital_out& statusLED;
+
+    P_controller& pController;
+    PI_controller& piController;
+
+    State* initializationState;
+    State* operationalState;
+
+    uint8_t ledCounter;
+
+    bool piSelected;
+
+    void print_configuration();
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/speed_controller.h

@@ -0,0 +1,47 @@
+#ifndef SPEED_CONTROLLER_H
+#define SPEED_CONTROLLER_H
+
+#include <encoder.h>
+#include <speed_estimator.h>
+#include <motor_driver.h>
+#include <controller.h>
+
+class Speed_controller
+{
+public:
+    Speed_controller(
+        Encoder& encoder,
+        Speed_estimator& estimator,
+        Motor_driver& motor,
+        Controller& controller
+    );
+
+    void start();
+    void stop();
+    void brake();
+
+    void update();
+
+    void set_reference(double rpm);
+    double reference() const;
+
+    void set_controller(Controller& controller);
+
+    double actual_rpm() const;
+    double control_output() const;
+
+private:
+    Encoder& encoder;
+    Speed_estimator& estimator;
+    Motor_driver& motor;
+
+    Controller* controller;
+
+    bool running;
+
+    double referenceRPM;
+    double actualRPM;
+    double controlOutput;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/speed_estimator.h

@@ -0,0 +1,37 @@
+#ifndef SPEED_ESTIMATOR_H
+#define SPEED_ESTIMATOR_H
+
+#include <stdint.h>
+
+class Speed_estimator
+{
+public:
+    Speed_estimator(
+        double countsPerRevolution,
+        double sampleTimeSeconds
+    );
+
+    void reset(int32_t initialPosition);
+
+    double update(int32_t currentPosition);
+
+    double rpm() const;
+
+private:
+    static const uint8_t WINDOW_SIZE = 10;
+
+    double countsPerRevolution;
+    double sampleTime;
+
+    int32_t previousPosition;
+
+    int32_t countHistory[WINDOW_SIZE];
+    int32_t rollingCounts;
+
+    uint8_t historyIndex;
+    uint8_t samplesFilled;
+
+    double currentRPM;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/state.h

@@ -0,0 +1,45 @@
+#ifndef STATE_H
+#define STATE_H
+
+class Context;
+
+class State
+{
+protected:
+    Context* context_ = nullptr;
+
+public:
+    virtual ~State() = default;
+
+    void set_context(Context* context)
+    {
+        context_ = context;
+    }
+
+    virtual const char* name() const = 0;
+
+    virtual void on_entry() = 0;
+    virtual void on_do() = 0;
+    virtual void on_exit() = 0;
+
+    // State-machine events
+    virtual void reset() {}
+    virtual void set_operational() {}
+    virtual void set_pre_operational() {}
+    virtual void fault() {}
+
+    // Pre-operational configuration events
+    virtual void select_p() {}
+    virtual void select_pi() {}
+    virtual void set_kp(double value)
+    {
+        (void)value;
+    }
+
+    virtual void set_ti(double value)
+    {
+        (void)value;
+    }
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/include/stopped.h

@@ -0,0 +1,51 @@
+#ifndef STOPPED_H
+#define STOPPED_H
+
+#include <stdint.h>
+
+#include <state.h>
+#include <speed_controller.h>
+#include <digital_out.h>
+
+class Stopped : public State
+{
+public:
+    Stopped(
+        Speed_controller& speedController,
+        Digital_out& statusLED
+    );
+
+    const char* name() const override;
+
+    void on_entry() override;
+    void on_do() override;
+    void on_exit() override;
+
+    void reset() override;
+    void set_pre_operational() override;
+    void set_operational() override;
+
+    void set_initialization_state(
+        State& initializationState
+    );
+
+    void set_pre_operational_state(
+        State& preOperationalState
+    );
+
+    void set_operational_state(
+        State& operationalState
+    );
+
+private:
+    Speed_controller& speedController;
+    Digital_out& statusLED;
+
+    State* initializationState;
+    State* preOperationalState;
+    State* operationalState;
+
+    uint8_t ledCounter;
+};
+
+#endif

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into the executable file.
+
+The source code of each library should be placed in a separate directory
+("lib/your_library_name/[Code]").
+
+For example, see the structure of the following example libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional. for custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+Example contents of `src/main.c` using Foo and Bar:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+The PlatformIO Library Dependency Finder will find automatically dependent
+libraries by scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/platformio.ini

@@ -0,0 +1,17 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter, extra scripting
+;   Upload options: custom port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:nucleo_l432kc]
+platform = ststm32
+board = nucleo_l432kc
+framework = zephyr
+
+test_framework = unity
+build_flags = -I"C:\Users\nokkv\.platformio\packages\framework-zephyr\include\zephyr"
+monitor_speed = 115200

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/A4.1main.cpp

@@ -0,0 +1,98 @@
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <zephyr/kernel.h>
+#include <zephyr/drivers/gpio.h>
+#include <zephyr/drivers/pwm.h>
+#include <zephyr/sys/printk.h>
+
+
+//#include <zephyr/dt-bindings/gpio/gpio.h>   /* GPIO_ACTIVE_LOW, GPIO_PULL_UP */
+//#include <zephyr/boards/nucleo_l432kc.overlay>
+
+
+
+/* 1000 msec = 1 sec */
+#define SLEEP_TIME_MS   200 
+
+/* The devicetree node identifier for the "led0" alias. */
+#define LED0_NODE DT_ALIAS(led0)
+// we add button
+#define BUTTON_NODE DT_ALIAS(sw1)
+
+
+/*
+ * A build error on this line means your board is unsupported.
+ * See the sample documentation for information on how to fix this.
+ */
+static const struct gpio_dt_spec led = GPIO_DT_SPEC_GET(LED0_NODE, gpios);
+static const struct gpio_dt_spec button = GPIO_DT_SPEC_GET(BUTTON_NODE, gpios);
+
+// we add interrupt driven.
+static struct gpio_callback button_cb_data;
+
+// Work item
+static struct k_work button_work;
+
+bool led_state = true;
+
+//k work
+static void button_work_handler(struct k_work *work)
+{
+	gpio_pin_toggle_dt(&led);
+	led_state = !led_state;
+	printf("LED state: %s\n", led_state ? "ON" : "OFF");
+}
+
+static void on_press(const struct device *dev, struct gpio_callback
+*cb_data, uint32_t pins) {k_work_submit(&button_work);}
+
+
+
+
+
+int main(void)
+{
+	int ret;
+
+	if (!gpio_is_ready_dt(&button)) {
+		return 0;
+	}
+
+	if (!gpio_is_ready_dt(&led)) {
+		return 0;
+	}
+
+	ret = gpio_pin_configure_dt(&led, GPIO_OUTPUT_ACTIVE);
+	if (ret < 0) {
+		return 0;
+	}
+
+ 	ret = gpio_pin_configure_dt(&button, GPIO_INPUT);
+    if (ret < 0) {
+        return ret;
+    }
+
+	// configure interrupt
+
+	// button = D3, from the sw1 alias
+	ret = gpio_pin_interrupt_configure_dt(&button, GPIO_INT_EDGE_TO_ACTIVE);
+	if (ret < 0) {
+        return ret;
+    }
+
+	//initialize work
+	k_work_init(&button_work, button_work_handler);
+
+	// initialize callback
+	gpio_init_callback(&button_cb_data, on_press, BIT(button.pin));
+
+	 // Register callback
+	gpio_add_callback(button.port, &button_cb_data);
+
+	while (1) {
+		k_msleep(SLEEP_TIME_MS);
+	
+	}
+	return 0;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/context.cpp

@@ -0,0 +1,109 @@
+#include <Arduino.h>
+#include <context.h>
+
+Context::Context(State& initialState)
+    : state(nullptr)
+{
+    transition_to(initialState);
+}
+
+void Context::transition_to(State& newState)
+{
+    if (state != nullptr)
+    {
+        state->on_exit();
+
+        Serial.print("Transition: ");
+        Serial.print(state->name());
+        Serial.print(" -> ");
+        Serial.println(newState.name());
+    }
+
+    state = &newState;
+
+    state->set_context(this);
+
+    state->on_entry();
+}
+
+void Context::do_work()
+{
+    if (state != nullptr)
+    {
+        state->on_do();
+    }
+}
+
+void Context::reset()
+{
+    if (state != nullptr)
+    {
+        state->reset();
+    }
+}
+
+void Context::set_operational()
+{
+    if (state != nullptr)
+    {
+        state->set_operational();
+    }
+}
+
+void Context::set_pre_operational()
+{
+    if (state != nullptr)
+    {
+        state->set_pre_operational();
+    }
+}
+
+void Context::fault()
+{
+    if (state != nullptr)
+    {
+        state->fault();
+    }
+}
+
+void Context::select_p()
+{
+    if (state != nullptr)
+    {
+        state->select_p();
+    }
+}
+
+void Context::select_pi()
+{
+    if (state != nullptr)
+    {
+        state->select_pi();
+    }
+}
+
+void Context::set_kp(double value)
+{
+    if (state != nullptr)
+    {
+        state->set_kp(value);
+    }
+}
+
+void Context::set_ti(double value)
+{
+    if (state != nullptr)
+    {
+        state->set_ti(value);
+    }
+}
+
+const char* Context::current_state_name() const
+{
+    if (state == nullptr)
+    {
+        return "None";
+    }
+
+    return state->name();
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/control_timer.cpp

@@ -0,0 +1,70 @@
+#include <control_timer.h>
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/atomic.h>
+
+static volatile uint8_t pendingTicks = 0;
+static volatile uint32_t totalTicks = 0;
+
+ISR(TIMER1_COMPA_vect)
+{
+    totalTicks++;
+
+    if (pendingTicks < 255)
+    {
+        pendingTicks++;
+    }
+}
+
+void Control_timer::init()
+{
+    pendingTicks = 0;
+    totalTicks = 0;
+
+    // Timer1 CTC mode, 250 Hz
+    // 16 MHz / 64 / (999 + 1) = 250 Hz
+
+    TCCR1A = 0;
+    TCCR1B = 0;
+    TCNT1 = 0;
+
+    OCR1A = 999;
+
+    TCCR1B |= (1 << WGM12);
+
+    // Prescaler = 64
+    TCCR1B |=
+        (1 << CS11) |
+        (1 << CS10);
+
+    TIMSK1 |= (1 << OCIE1A);
+}
+
+bool Control_timer::take_tick()
+{
+    bool tickAvailable = false;
+
+    ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
+    {
+        if (pendingTicks > 0)
+        {
+            pendingTicks--;
+            tickAvailable = true;
+        }
+    }
+
+    return tickAvailable;
+}
+
+uint32_t Control_timer::tick_count() const
+{
+    uint32_t ticks;
+
+    ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
+    {
+        ticks = totalTicks;
+    }
+
+    return ticks;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/digital_in.cpp

@@ -0,0 +1,19 @@
+#include <digital_in.h>
+#define INPUT_NODE DT_ALIAS(sw1)
+
+Digital_in::Digital_in(): pin(GPIO_DT_SPEC_GET(INPUT_NODE, gpios)){}
+
+void Digital_in::init()
+{
+    gpio_pin_configure_dt(&pin, GPIO_INPUT);
+}
+
+bool Digital_in::is_hi() const
+{
+    return gpio_pin_get_dt(&pin) > 0;
+}
+
+bool Digital_in::is_lo() const
+{
+    return gpio_pin_get_dt(&pin) == 0;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/digital_out.cpp

@@ -0,0 +1,24 @@
+#include <digital_out.h>
+#define LED_NODE DT_ALIAS(led0)
+
+Digital_out::Digital_out():pin(GPIO_DT_SPEC_GET(LED_NODE, gpios)){}
+
+void Digital_out::init()
+{
+    gpio_pin_configure_dt(&pin, GPIO_OUTPUT_INACTIVE);
+}
+
+void Digital_out::set_hi()
+{
+    gpio_pin_set_dt(&pin, 1);
+}
+
+void Digital_out::set_lo()
+{
+    gpio_pin_set_dt(&pin, 0);
+}
+
+void Digital_out::toggle()
+{
+    gpio_pin_toggle_dt(&pin);
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/encoder.cpp

@@ -0,0 +1,79 @@
+#include <encoder.h>
+
+#include <zephyr/kernel.h>
+#include <zephyr/sys/util.h>
+
+#define ENCODER_C1_NODE DT_ALIAS(encoder_c1)
+#define ENCODER_C2_NODE DT_ALIAS(encoder_c2)
+
+static const struct gpio_dt_spec encoderC1 =
+    GPIO_DT_SPEC_GET(ENCODER_C1_NODE, gpios);
+
+static const struct gpio_dt_spec encoderC2 =
+    GPIO_DT_SPEC_GET(ENCODER_C2_NODE, gpios);
+
+
+
+void Encoder::callback(const struct device *port,struct gpio_callback *cb,uint32_t pins)
+{
+    Encoder *encoder = CONTAINER_OF(cb, Encoder, gpioCallback);
+    encoder->update();
+}
+
+Encoder::Encoder()
+    : c1(&encoderC1),
+      c2(&encoderC2),
+      previousC1(false),
+      count(0)
+{
+}
+
+void Encoder::init()
+{
+    c1.init();
+    c2.init();
+
+    activeEncoder = this;
+
+    previousC1 = c1.is_hi();
+    count = 0;
+
+    // Clear pending PORTB pin-change interrupt
+    gpio_init_callback(&gpioCallback,Encoder::callback,BIT(encoderC1.pin));
+
+    // Enable PORTB pin-change interrupts
+    gpio_add_callback(encoderC1.port, &gpioCallback);
+
+    // Enable interrupt on C1
+    gpio_pin_interrupt_configure_dt(&encoderC1, GPIO_INT_EDGE_BOTH);
+}
+
+void Encoder::update()
+{
+    bool currentC1 = c1.is_hi();
+
+    if (currentC1 != previousC1)
+    {
+        bool currentC2 = c2.is_hi();
+
+        if (currentC1 == currentC2)
+        {
+            count++;
+        }
+        else
+        {
+            count--;
+        }
+
+        previousC1 = currentC1;
+    }
+}
+
+int32_t Encoder::position() const
+{
+    unsigned int key = irq_lock();
+    int32_t currentCount = count;
+    irq_unlock(key);
+
+    return currentCount;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/initialization.cpp

@@ -0,0 +1,61 @@
+#include <Arduino.h>
+
+#include <initialization.h>
+#include <context.h>
+
+Initialization::Initialization(
+    Speed_controller& speedController,
+    Digital_out& statusLED
+)
+    : speedController(speedController),
+      statusLED(statusLED),
+      preOperationalState(nullptr),
+      transitionPending(false)
+{
+}
+
+const char* Initialization::name() const
+{
+    return "Initialization";
+}
+
+void Initialization::on_entry()
+{
+    speedController.stop();
+
+    statusLED.set_lo();
+
+    Serial.println();
+    Serial.println("Initialization");
+    Serial.println("Boot-up");
+
+    // CANopen-style autonomous transition
+    // into PreOperational.
+    transitionPending = true;
+}
+
+void Initialization::on_do()
+{
+    if (
+        transitionPending &&
+        preOperationalState != nullptr
+    )
+    {
+        transitionPending = false;
+
+        context_->transition_to(
+            *preOperationalState
+        );
+    }
+}
+
+void Initialization::on_exit()
+{
+}
+
+void Initialization::set_pre_operational_state(
+    State& state
+)
+{
+    preOperationalState = &state;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/main.cpp

@@ -0,0 +1,190 @@
+#include <zephyr/devicetree.h>
+#include <zephyr/drivers/uart.h>
+
+#include <digital_in.h>
+#include <digital_out.h>
+#include <encoder.h>
+
+#include <control_timer.h>
+#include <speed_estimator.h>
+
+#include <motor_driver.h>
+
+#include <p_controller.h>
+#include <speed_controller.h>
+
+#include <context.h>
+#include <initialization.h>
+#include <operational.h>
+#include <stopped.h>
+
+// --------------------------------------------------
+// Hardware / drivers
+// --------------------------------------------------
+
+// Encoder:
+// PB0 = D8
+// PB1 = D9
+Encoder encoder;
+
+// Emergency-stop:
+// PB2 = D10
+// Internal pull-up enabled.
+// LOW = emergency stop pressed.
+Digital_in emergencyStop;
+
+// Status LED:
+// PB5 = D13
+Digital_out statusLED;
+
+Control_timer controlTimer;
+
+Motor_driver motorDriver;
+
+// 2100 counts/revolution,
+// 4 ms fixed controller period
+Speed_estimator speedEstimator(
+    2100.0,
+    0.004
+);
+
+P_controller pController(40.0);
+
+Speed_controller speedController(
+    encoder,
+    speedEstimator,
+    motorDriver,
+    pController
+);
+
+// --------------------------------------------------
+// State machine
+// --------------------------------------------------
+
+Initialization initialization(
+    speedController,
+    statusLED
+);
+
+Operational operational(
+    speedController,
+    statusLED
+);
+
+Stopped stopped(
+    speedController,
+    statusLED
+);
+
+Context* stateMachine = nullptr;
+
+static const struct device* uartDevice =
+    DEVICE_DT_GET(DT_CHOSEN(zephyr_console));
+
+int main()
+{
+
+    if (!device_is_ready(uartDevice))
+    {
+        printk("Console UART is not ready\n");
+        return 0;
+    
+    }
+
+    statusLED.init();
+
+    emergencyStop.init();
+
+    encoder.init();
+
+    motorDriver.init();
+
+    speedController.set_reference(
+        50.0
+    );
+
+    // --------------------------------------------------
+    // State transitions
+    // --------------------------------------------------
+
+    initialization.set_operational_state(
+        operational
+    );
+
+    operational.set_initialization_state(
+        initialization
+    );
+
+    operational.set_stopped_state(
+        stopped
+    );
+
+    stopped.set_initialization_state(
+        initialization
+    );
+
+    static Context context(
+        initialization
+    );
+
+    stateMachine = &context;
+
+    controlTimer.init();
+
+    printk("\n");
+    printk("Project 3 - Part 2\n");
+    printk("Commands:\n");
+    printk("o = set operational\n");
+    printk("r = reset\n");
+    printk("Emergency stop or motor fault = fault\n");
+
+
+    while (true)
+        {
+        // --------------------------------------------------
+        // Emergency-stop fault
+        // --------------------------------------------------
+
+        if (emergencyStop.is_hi()) // was is_lo
+        {
+            stateMachine->fault();
+        }
+
+        if (motorDriver.has_fault())
+        {
+            stateMachine->fault();
+        }
+
+        // --------------------------------------------------
+        // Serial commands
+        // --------------------------------------------------
+
+        unsigned char command;
+
+        if (uart_poll_in(uartDevice, &command) == 0)
+        {
+            if (command == 'o')
+            {
+                stateMachine->
+                    set_operational();
+            }
+            else if (command == 'r')
+            {
+                stateMachine->
+                    reset();
+            }
+        }
+        
+
+        // --------------------------------------------------
+        // Stable 250 Hz state activity
+        // --------------------------------------------------
+
+        if (controlTimer.take_tick())
+        {
+            stateMachine->do_work();
+        }
+        k_sleep(K_MSEC(1));
+    }
+    return 0;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/motor_driver.cpp

@@ -0,0 +1,106 @@
+#include <motor_driver.h>
+#include <zephyr/drivers/pwm.h>
+#include <zephyr/devicetree.h>
+
+#define AIN1_NODE DT_ALIAS(motor_ain1)
+#define AIN2_NODE DT_ALIAS(motor_ain2)
+
+static const struct pwm_dt_spec ain1 = PWM_DT_SPEC_GET(AIN1_NODE);
+
+static const struct pwm_dt_spec ain2 = PWM_DT_SPEC_GET(AIN2_NODE);
+
+
+void Motor_driver::init()
+{
+    currentCommand = 0.0;
+
+    enable_pwm_outputs();
+
+    coast();
+}
+
+void Motor_driver::enable_pwm_outputs()
+{
+    // The PWM peripheral is configured through devicetree.
+}
+
+unsigned char Motor_driver::magnitude(
+    double value
+) const
+{
+    if (value < 0.0)
+    {
+        value = -value;
+    }
+
+    if (value > 255.0)
+    {
+        value = 255.0;
+    }
+
+    return static_cast<unsigned char>(value);
+}
+
+void Motor_driver::set_command(double command)
+{
+    if (command > 255.0)
+    {
+        command = 255.0;
+    }
+
+    if (command < -255.0)
+    {
+        command = -255.0;
+    }
+
+    currentCommand = command;
+
+    enable_pwm_outputs();
+
+    unsigned char pwm =
+        magnitude(command);
+
+
+    if (command > 0.0)
+    {
+        // Same direction that previously gave positive RPM:
+        // AIN1 = LOW
+        // AIN2 = PWM
+    pwm_set_dt(&ain1, ain1.period, 0);
+    pwm_set_dt(&ain2, ain2.period,
+        static_cast<uint32_t>(ain2.period * pwm / 255.0));
+    }
+    else if (command < 0.0)
+    {
+        
+        pwm_set_dt(&ain1, ain1.period,
+            static_cast<uint32_t>(ain1.period * pwm / 255.0));
+        pwm_set_dt(&ain2, ain2.period, 0);
+    }
+    else
+    {
+        coast();
+    }
+}
+
+void Motor_driver::coast()
+{
+    currentCommand = 0.0;
+
+    pwm_set_dt(&ain1, ain1.period, 0);
+    pwm_set_dt(&ain2, ain2.period, 0);
+}
+
+void Motor_driver::brake()
+{
+    currentCommand = 0.0;
+
+    // DRV8833: both inputs HIGH gives braking.
+    pwm_set_dt(&ain1, ain1.period, ain1.period);
+    pwm_set_dt(&ain2, ain2.period, ain2.period);
+}
+
+double Motor_driver::command() const
+{
+    return currentCommand;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/operational.cpp

@@ -0,0 +1,143 @@
+#include <Arduino.h>
+
+#include <operational.h>
+#include <context.h>
+
+Operational::Operational(
+    Speed_controller& speedController,
+    Digital_out& statusLED
+)
+    : speedController(speedController),
+      statusLED(statusLED),
+      initializationState(nullptr),
+      preOperationalState(nullptr),
+      stoppedState(nullptr),
+      logCounter(0),
+      sampleCounter(0)
+{
+}
+
+const char* Operational::name() const
+{
+    return "Operational";
+}
+
+void Operational::on_entry()
+{
+    Serial.println();
+    Serial.println("Operational");
+
+    statusLED.set_hi();
+
+    logCounter = 0;
+    sampleCounter = 0;
+
+    speedController.start();
+
+    Serial.println(
+        "DATA,time_ms,reference_rpm,actual_rpm,control"
+    );
+}
+
+void Operational::on_do()
+{
+    speedController.update();
+
+    sampleCounter++;
+    logCounter++;
+
+    // 5 controller ticks × 4 ms = 20 ms
+    // => 50 Hz logging rate.
+    if (logCounter >= 5)
+    {
+        logCounter = 0;
+
+        const uint32_t time_ms =
+            sampleCounter * 4UL;
+
+        Serial.print("DATA,");
+        Serial.print(time_ms);
+        Serial.print(",");
+
+        Serial.print(
+            speedController.reference(),
+            2
+        );
+
+        Serial.print(",");
+
+        Serial.print(
+            speedController.actual_rpm(),
+            2
+        );
+
+        Serial.print(",");
+
+        Serial.println(
+            speedController.control_output(),
+            2
+        );
+    }
+}
+
+void Operational::on_exit()
+{
+    speedController.stop();
+
+    statusLED.set_lo();
+}
+
+void Operational::reset()
+{
+    if (initializationState != nullptr)
+    {
+        context_->transition_to(
+            *initializationState
+        );
+    }
+}
+
+void Operational::set_pre_operational()
+{
+    if (preOperationalState != nullptr)
+    {
+        context_->transition_to(
+            *preOperationalState
+        );
+    }
+}
+
+void Operational::fault()
+{
+    if (stoppedState != nullptr)
+    {
+        Serial.println(
+            "FAULT detected"
+        );
+
+        context_->transition_to(
+            *stoppedState
+        );
+    }
+}
+
+void Operational::set_initialization_state(
+    State& state
+)
+{
+    initializationState = &state;
+}
+
+void Operational::set_pre_operational_state(
+    State& state
+)
+{
+    preOperationalState = &state;
+}
+
+void Operational::set_stopped_state(
+    State& state
+)
+{
+    stoppedState = &state;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/p_controller.cpp

@@ -0,0 +1,63 @@
+#include <p_controller.h>
+
+P_controller::P_controller(
+    double kp
+)
+    : kp(kp)
+{
+}
+
+double P_controller::update(
+    double reference,
+    double actual
+)
+{
+    const double error =
+        reference - actual;
+
+    const double output =
+        kp * error;
+
+    return limit(output);
+}
+
+void P_controller::reset()
+{
+}
+
+const char* P_controller::name() const
+{
+    return "P";
+}
+
+void P_controller::set_kp(
+    double value
+)
+{
+    if (value > 0.0)
+    {
+        kp = value;
+    }
+}
+
+double P_controller::get_kp() const
+{
+    return kp;
+}
+
+double P_controller::limit(
+    double value
+) const
+{
+    if (value > 255.0)
+    {
+        return 255.0;
+    }
+
+    if (value < -255.0)
+    {
+        return -255.0;
+    }
+
+    return value;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/pi_controller.cpp

@@ -0,0 +1,141 @@
+#include <pi_controller.h>
+
+PI_controller::PI_controller(
+    double kp,
+    double ti,
+    double timestep
+)
+    : kp(kp),
+      ti(ti),
+      timestep(timestep),
+      integral(0.0)
+{
+}
+
+double PI_controller::update(
+    double reference,
+    double actual
+)
+{
+    const double error =
+        reference - actual;
+
+    // Candidate integral:
+    // E(k) = E(k-1) + e(k)T
+    const double candidateIntegral =
+        integral + error * timestep;
+
+    // Candidate PI output:
+    // u = Kp * (e + E/Ti)
+    const double candidateOutput =
+        kp *
+        (
+            error +
+            candidateIntegral / ti
+        );
+
+    // -----------------------------------------
+    // Conditional integration / anti-windup
+    // -----------------------------------------
+
+    // Integrate normally if the candidate
+    // controller output is not saturated.
+    if (
+        candidateOutput <= 255.0 &&
+        candidateOutput >= -255.0
+    )
+    {
+        integral =
+            candidateIntegral;
+    }
+
+    // If positively saturated, only integrate
+    // if the error is driving the output back down.
+    else if (
+        candidateOutput > 255.0 &&
+        error < 0.0
+    )
+    {
+        integral =
+            candidateIntegral;
+    }
+
+    // If negatively saturated, only integrate
+    // if the error is driving the output back up.
+    else if (
+        candidateOutput < -255.0 &&
+        error > 0.0
+    )
+    {
+        integral =
+            candidateIntegral;
+    }
+
+    const double output =
+        kp *
+        (
+            error +
+            integral / ti
+        );
+
+    return limit(output);
+}
+
+void PI_controller::reset()
+{
+    integral = 0.0;
+}
+
+const char* PI_controller::name() const
+{
+    return "PI";
+}
+
+void PI_controller::set_kp(
+    double value
+)
+{
+    kp = value;
+}
+
+double PI_controller::get_kp() const
+{
+    return kp;
+}
+
+void PI_controller::set_ti(
+    double value
+)
+{
+    if (value > 0.0)
+    {
+        ti = value;
+    }
+}
+
+double PI_controller::get_ti() const
+{
+    return ti;
+}
+
+double PI_controller::get_timestep() const
+{
+    return timestep;
+}
+
+double PI_controller::limit(
+    double value
+) const
+{
+    if (value > 255.0)
+    {
+        return 255.0;
+    }
+
+    if (value < -255.0)
+    {
+        return -255.0;
+    }
+
+    return value;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/pre_operational.cpp

@@ -0,0 +1,225 @@
+#include <Arduino.h>
+
+#include <pre_operational.h>
+#include <context.h>
+
+PreOperational::PreOperational(
+    Speed_controller& speedController,
+    Digital_out& statusLED,
+    P_controller& pController,
+    PI_controller& piController
+)
+    : speedController(speedController),
+      statusLED(statusLED),
+      pController(pController),
+      piController(piController),
+      initializationState(nullptr),
+      operationalState(nullptr),
+      ledCounter(0),
+      piSelected(false)
+{
+}
+
+const char* PreOperational::name() const
+{
+    return "PreOperational";
+}
+
+void PreOperational::on_entry()
+{
+    // Motor must not run while configuring.
+    speedController.stop();
+
+    statusLED.set_lo();
+
+    ledCounter = 0;
+
+    Serial.println();
+    Serial.println("PreOperational");
+    Serial.println("Motor control disabled.");
+
+    print_configuration();
+
+    Serial.println();
+    Serial.println("Commands:");
+    Serial.println("p = select P controller");
+    Serial.println("i = select PI controller");
+    Serial.println("k<number> = set Kp");
+    Serial.println("t<number> = set Ti");
+    Serial.println("o = set operational");
+    Serial.println("r = reset");
+}
+
+void PreOperational::on_do()
+{
+    // State activity runs every 4 ms.
+    //
+    // 1 Hz LED:
+    // full period = 1000 ms
+    // toggle every 500 ms
+    //
+    // 500 ms / 4 ms = 125 ticks
+
+    ledCounter++;
+
+    if (ledCounter >= 125)
+    {
+        ledCounter = 0;
+
+        statusLED.toggle();
+    }
+}
+
+void PreOperational::on_exit()
+{
+    statusLED.set_lo();
+}
+
+void PreOperational::reset()
+{
+    if (initializationState != nullptr)
+    {
+        context_->transition_to(
+            *initializationState
+        );
+    }
+}
+
+void PreOperational::set_operational()
+{
+    if (operationalState != nullptr)
+    {
+        context_->transition_to(
+            *operationalState
+        );
+    }
+}
+
+void PreOperational::select_p()
+{
+    piSelected = false;
+
+    speedController.set_controller(
+        pController
+    );
+
+    Serial.println(
+        "Controller selected: P"
+    );
+
+    print_configuration();
+}
+
+void PreOperational::select_pi()
+{
+    piSelected = true;
+
+    speedController.set_controller(
+        piController
+    );
+
+    Serial.println(
+        "Controller selected: PI"
+    );
+
+    print_configuration();
+}
+
+void PreOperational::set_kp(
+    double value
+)
+{
+    if (value <= 0.0)
+    {
+        Serial.println(
+            "Invalid Kp."
+        );
+
+        return;
+    }
+
+    if (piSelected)
+    {
+        piController.set_kp(
+            value
+        );
+    }
+    else
+    {
+        pController.set_kp(
+            value
+        );
+    }
+
+    Serial.print("Kp set to: ");
+    Serial.println(value, 4);
+}
+
+void PreOperational::set_ti(
+    double value
+)
+{
+    if (value <= 0.0)
+    {
+        Serial.println(
+            "Invalid Ti."
+        );
+
+        return;
+    }
+
+    piController.set_ti(
+        value
+    );
+
+    Serial.print("Ti set to: ");
+    Serial.print(value, 4);
+    Serial.println(" s");
+}
+
+void PreOperational::set_initialization_state(
+    State& state
+)
+{
+    initializationState = &state;
+}
+
+void PreOperational::set_operational_state(
+    State& state
+)
+{
+    operationalState = &state;
+}
+
+void PreOperational::print_configuration()
+{
+    Serial.print("Controller: ");
+
+    if (piSelected)
+    {
+        Serial.println("PI");
+
+        Serial.print("Kp = ");
+        Serial.println(
+            piController.get_kp(),
+            4
+        );
+
+        Serial.print("Ti = ");
+        Serial.print(
+            piController.get_ti(),
+            4
+        );
+        Serial.println(" s");
+    }
+    else
+    {
+        Serial.println("P");
+
+        Serial.print("Kp = ");
+        Serial.println(
+            pController.get_kp(),
+            4
+        );
+    }
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/project3main.cpp

@@ -0,0 +1,427 @@
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <zephyr/kernel.h>
+#include <zephyr/drivers/gpio.h> 
+#include <zephyr/drivers/pwm.h> // from A4.1
+#include <zephyr/sys/printk.h> // so i can print using serial monitor
+
+//#include <Arduino.h> removed since it was for arduino
+
+// sdo configuration
+// rpdo1 real time 
+
+
+#include <digital_in.h>
+#include <digital_out.h>
+#include <encoder.h>
+
+#include <control_timer.h>
+#include <speed_estimator.h>
+
+#include <motor_driver.h>
+
+#include <p_controller.h>
+#include <pi_controller.h>
+#include <speed_controller.h>
+
+#include <context.h>
+#include <initialization.h>
+#include <pre_operational.h>
+#include <operational.h>
+#include <stopped.h>
+
+// --------------------------------------------------
+// Hardware / drivers
+// --------------------------------------------------
+
+// Encoder:
+// PB0 = D8
+// PB1 = D9
+Encoder encoder(0, 1);
+
+// Emergency stop:
+// PB2 = D10
+// Internal pull-up enabled.
+// LOW = emergency stop pressed.
+Digital_in emergencyStop(2);
+
+// Status LED:
+// PB5 = D13
+Digital_out statusLED(5);
+
+Control_timer controlTimer;
+
+Motor_driver motorDriver;
+
+// Encoder resolution = 2100 counts/revolution
+// Controller period = 4 ms = 250 Hz
+Speed_estimator speedEstimator(
+    2100.0,
+    0.004
+);
+
+// --------------------------------------------------
+// Controllers
+// --------------------------------------------------
+
+P_controller pController(
+    40.0
+);
+
+PI_controller piController(
+    40.0,   // Kp
+    0.50,   // Ti [s]
+    0.004   // timestep [s]
+);
+
+Speed_controller speedController(
+    encoder,
+    speedEstimator,
+    motorDriver,
+    pController
+);
+
+// --------------------------------------------------
+// State machine states
+// --------------------------------------------------
+
+Initialization initialization(
+    speedController,
+    statusLED
+);
+
+PreOperational preOperational(
+    speedController,
+    statusLED,
+    pController,
+    piController
+);
+
+Operational operational(
+    speedController,
+    statusLED
+);
+
+Stopped stopped(
+    speedController,
+    statusLED
+);
+
+Context* stateMachine = nullptr;
+
+// --------------------------------------------------
+// Serial command buffer
+// --------------------------------------------------
+
+char commandBuffer[32];
+uint8_t commandIndex = 0;
+
+// --------------------------------------------------
+// Process one complete serial command
+// --------------------------------------------------
+
+void processCommand(const char* command)
+{
+    if (command[0] == '\0')
+    {
+        return;
+    }
+
+    // --------------------------------------------------
+    // Single-character commands
+    // --------------------------------------------------
+
+    if (
+        command[0] == 'o' &&
+        command[1] == '\0'
+    )
+    {
+        stateMachine->set_operational();
+    }
+
+    else if (
+        command[0] == 'c' &&
+        command[1] == '\0'
+    )
+    {
+        stateMachine->set_pre_operational();
+    }
+
+    else if (
+        command[0] == 'r' &&
+        command[1] == '\0'
+    )
+    {
+        stateMachine->reset();
+    }
+
+    else if (
+        command[0] == 'p' &&
+        command[1] == '\0'
+    )
+    {
+        stateMachine->select_p();
+    }
+
+    else if (
+        command[0] == 'i' &&
+        command[1] == '\0'
+    )
+    {
+        stateMachine->select_pi();
+    }
+
+    // --------------------------------------------------
+    // k<number> = set Kp
+    // Example:
+    // k30.625
+    // --------------------------------------------------
+
+    else if (command[0] == 'k')
+    {
+        char* endPointer;
+
+        double value =
+            strtod(
+                command + 1,
+                &endPointer
+            );
+
+        if (
+            endPointer == command + 1 ||
+            *endPointer != '\0'
+        )
+        {
+            Serial.println(
+                "Invalid Kp command."
+            );
+
+            Serial.println(
+                "Example: k30.625"
+            );
+
+            return;
+        }
+
+        stateMachine->set_kp(
+            value
+        );
+    }
+
+    // --------------------------------------------------
+    // t<number> = set Ti
+    // Example:
+    // t0.4
+    // --------------------------------------------------
+
+    else if (command[0] == 't')
+    {
+        char* endPointer;
+
+        double value =
+            strtod(
+                command + 1,
+                &endPointer
+            );
+
+        if (
+            endPointer == command + 1 ||
+            *endPointer != '\0'
+        )
+        {
+            Serial.println(
+                "Invalid Ti command."
+            );
+
+            Serial.println(
+                "Example: t0.4"
+            );
+
+            return;
+        }
+
+        stateMachine->set_ti(
+            value
+        );
+    }
+
+    else
+    {
+        Serial.print(
+            "Unknown command: "
+        );
+
+        Serial.println(
+            command
+        );
+    }
+}
+
+// --------------------------------------------------
+// Non-blocking serial command reader
+// --------------------------------------------------
+
+void readSerialCommands()
+{
+    while (Serial.available() > 0)
+    {
+        char character =
+            Serial.read();
+
+        // Ignore carriage return
+        if (character == '\r')
+        {
+            continue;
+        }
+
+        // Newline = end of command
+        if (character == '\n')
+        {
+            commandBuffer[
+                commandIndex
+            ] = '\0';
+
+            processCommand(
+                commandBuffer
+            );
+
+            commandIndex = 0;
+
+            continue;
+        }
+
+        // Add character to buffer
+        if (
+            commandIndex <
+            sizeof(commandBuffer) - 1
+        )
+        {
+            commandBuffer[
+                commandIndex
+            ] = character;
+
+            commandIndex++;
+        }
+        else
+        {
+            // Buffer overflow
+            commandIndex = 0;
+
+            Serial.println(
+                "Command too long."
+            );
+        }
+    }
+}
+
+// --------------------------------------------------
+// Setup
+// --------------------------------------------------
+
+void setup()
+{
+    Serial.begin(115200);
+
+    statusLED.init();
+
+    emergencyStop.init();
+
+    encoder.init();
+
+    motorDriver.init();
+
+    // Initial target speed
+    speedController.set_reference(
+        50.0
+    );
+
+    // --------------------------------------------------
+    // Wire state transitions
+    // --------------------------------------------------
+
+    initialization.set_pre_operational_state(
+        preOperational
+    );
+
+    preOperational.set_initialization_state(
+        initialization
+    );
+
+    preOperational.set_operational_state(
+        operational
+    );
+
+    operational.set_initialization_state(
+        initialization
+    );
+
+    operational.set_pre_operational_state(
+        preOperational
+    );
+
+    operational.set_stopped_state(
+        stopped
+    );
+
+    stopped.set_initialization_state(
+        initialization
+    );
+
+    stopped.set_pre_operational_state(
+        preOperational
+    );
+
+    stopped.set_operational_state(
+        operational
+    );
+
+    // --------------------------------------------------
+    // Create state machine
+    // --------------------------------------------------
+
+    static Context context(
+        initialization
+    );
+
+    stateMachine = &context;
+
+    // Fixed 250 Hz timing
+    controlTimer.init();
+
+    Serial.println();
+    Serial.println(
+        "Project 3 - Part 4"
+    );
+}
+
+// --------------------------------------------------
+// Main loop
+// --------------------------------------------------
+
+void loop()
+{
+    // --------------------------------------------------
+    // Emergency stop
+    // --------------------------------------------------
+
+    if (emergencyStop.is_lo())
+    {
+        stateMachine->fault();
+    }
+
+    // --------------------------------------------------
+    // Serial interface
+    // --------------------------------------------------
+
+    readSerialCommands();
+
+    // --------------------------------------------------
+    // Fixed 250 Hz state-machine activity
+    // --------------------------------------------------
+
+    if (controlTimer.take_tick())
+    {
+        stateMachine->do_work();
+    }
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/speed_controller.cpp

@@ -0,0 +1,106 @@
+#include <speed_controller.h>
+
+Speed_controller::Speed_controller(
+    Encoder& encoder,
+    Speed_estimator& estimator,
+    Motor_driver& motor,
+    Controller& controller
+)
+    : encoder(encoder),
+      estimator(estimator),
+      motor(motor),
+      controller(&controller),
+      running(false),
+      referenceRPM(0.0),
+      actualRPM(0.0),
+      controlOutput(0.0)
+{
+}
+
+void Speed_controller::start()
+{
+    estimator.reset(
+        encoder.position()
+    );
+
+    controller->reset();
+
+    actualRPM = 0.0;
+    controlOutput = 0.0;
+
+    running = true;
+
+    motor.coast();
+}
+
+void Speed_controller::stop()
+{
+    running = false;
+
+    controlOutput = 0.0;
+
+    motor.coast();
+}
+
+void Speed_controller::brake()
+{
+    running = false;
+
+    controlOutput = 0.0;
+
+    motor.brake();
+}
+
+void Speed_controller::update()
+{
+    if (!running)
+    {
+        return;
+    }
+
+    actualRPM =
+        estimator.update(
+            encoder.position()
+        );
+
+    controlOutput =
+        controller->update(
+            referenceRPM,
+            actualRPM
+        );
+
+    motor.set_command(
+        controlOutput
+    );
+}
+
+void Speed_controller::set_reference(
+    double rpm
+)
+{
+    referenceRPM = rpm;
+}
+
+double Speed_controller::reference() const
+{
+    return referenceRPM;
+}
+
+void Speed_controller::set_controller(
+    Controller& newController
+)
+{
+    controller = &newController;
+
+    controller->reset();
+}
+
+double Speed_controller::actual_rpm() const
+{
+    return actualRPM;
+}
+
+double Speed_controller::control_output() const
+{
+    return controlOutput;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/speed_estimator.cpp

@@ -0,0 +1,76 @@
+#include <speed_estimator.h>
+
+Speed_estimator::Speed_estimator(
+    double countsPerRevolution,
+    double sampleTimeSeconds
+)
+    : countsPerRevolution(countsPerRevolution),
+      sampleTime(sampleTimeSeconds),
+      previousPosition(0),
+      rollingCounts(0),
+      historyIndex(0),
+      samplesFilled(0),
+      currentRPM(0.0)
+{
+    for (uint8_t i = 0; i < WINDOW_SIZE; i++)
+    {
+        countHistory[i] = 0;
+    }
+}
+
+void Speed_estimator::reset(int32_t initialPosition)
+{
+    previousPosition = initialPosition;
+
+    rollingCounts = 0;
+    historyIndex = 0;
+    samplesFilled = 0;
+    currentRPM = 0.0;
+
+    for (uint8_t i = 0; i < WINDOW_SIZE; i++)
+    {
+        countHistory[i] = 0;
+    }
+}
+
+double Speed_estimator::update(int32_t currentPosition)
+{
+    int32_t deltaCount =
+        currentPosition - previousPosition;
+
+    previousPosition = currentPosition;
+
+    rollingCounts -=
+        countHistory[historyIndex];
+
+    countHistory[historyIndex] =
+        deltaCount;
+
+    rollingCounts += deltaCount;
+
+    historyIndex++;
+
+    if (historyIndex >= WINDOW_SIZE)
+    {
+        historyIndex = 0;
+    }
+
+    if (samplesFilled < WINDOW_SIZE)
+    {
+        samplesFilled++;
+    }
+
+    double windowTime =
+        samplesFilled * sampleTime;
+
+    currentRPM =
+        (rollingCounts * 60.0) /
+        (countsPerRevolution * windowTime);
+
+    return currentRPM;
+}
+
+double Speed_estimator::rpm() const
+{
+    return currentRPM;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/src/stopped.cpp

@@ -0,0 +1,112 @@
+#include <Arduino.h>
+
+#include <stopped.h>
+#include <context.h>
+
+Stopped::Stopped(
+    Speed_controller& speedController,
+    Digital_out& statusLED
+)
+    : speedController(speedController),
+      statusLED(statusLED),
+      initializationState(nullptr),
+      preOperationalState(nullptr),
+      operationalState(nullptr),
+      ledCounter(0)
+{
+}
+
+const char* Stopped::name() const
+{
+    return "Stopped";
+}
+
+void Stopped::on_entry()
+{
+    Serial.println();
+    Serial.println("Stopped");
+    Serial.println(
+        "Emergency stop - motor brake active"
+    );
+
+    speedController.brake();
+
+    statusLED.set_hi();
+
+    ledCounter = 0;
+}
+
+void Stopped::on_do()
+{
+    // State activity runs every 4 ms.
+    //
+    // 2 Hz LED:
+    // toggle every ~250 ms
+    //
+    // 250 / 4 = 62.5 ticks
+
+    ledCounter++;
+
+    if (ledCounter >= 63)
+    {
+        ledCounter = 0;
+
+        statusLED.toggle();
+    }
+}
+
+void Stopped::on_exit()
+{
+    statusLED.set_lo();
+}
+
+void Stopped::reset()
+{
+    if (initializationState != nullptr)
+    {
+        context_->transition_to(
+            *initializationState
+        );
+    }
+}
+
+void Stopped::set_pre_operational()
+{
+    if (preOperationalState != nullptr)
+    {
+        context_->transition_to(
+            *preOperationalState
+        );
+    }
+}
+
+void Stopped::set_operational()
+{
+    if (operationalState != nullptr)
+    {
+        context_->transition_to(
+            *operationalState
+        );
+    }
+}
+
+void Stopped::set_initialization_state(
+    State& state
+)
+{
+    initializationState = &state;
+}
+
+void Stopped::set_pre_operational_state(
+    State& state
+)
+{
+    preOperationalState = &state;
+}
+
+void Stopped::set_operational_state(
+    State& state
+)
+{
+    operationalState = &state;
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Test Runner and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/en/latest/advanced/unit-testing/index.html

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/test/test_pi_controller/test_main.cpp

@@ -0,0 +1,438 @@
+#include <unity.h>
+
+#include <controller.h>
+#include <pi_controller.h>
+
+// --------------------------------------------------
+// Unity setup
+// --------------------------------------------------
+
+void setUp()
+{
+}
+
+void tearDown()
+{
+}
+
+// --------------------------------------------------
+// Normal-flow tests
+// --------------------------------------------------
+
+void test_zero_error_gives_zero_output()
+{
+    PI_controller controller(
+        10.0,
+        1.0,
+        0.1
+    );
+
+    double output =
+        controller.update(
+            50.0,
+            50.0
+        );
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        0.0,
+        output
+    );
+}
+
+void test_positive_error_gives_positive_output()
+{
+    PI_controller controller(
+        10.0,
+        1.0,
+        0.1
+    );
+
+    // error = 2
+    // E = 2 * 0.1 = 0.2
+    // u = 10 * (2 + 0.2 / 1)
+    //   = 22
+
+    double output =
+        controller.update(
+            52.0,
+            50.0
+        );
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        22.0,
+        output
+    );
+}
+
+void test_negative_error_gives_negative_output()
+{
+    PI_controller controller(
+        10.0,
+        1.0,
+        0.1
+    );
+
+    // error = -2
+    // E = -2 * 0.1 = -0.2
+    // u = 10 * (-2 - 0.2)
+    //   = -22
+
+    double output =
+        controller.update(
+            48.0,
+            50.0
+        );
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        -22.0,
+        output
+    );
+}
+
+void test_integral_accumulates_over_time()
+{
+    PI_controller controller(
+        10.0,
+        1.0,
+        0.1
+    );
+
+    double first =
+        controller.update(
+            51.0,
+            50.0
+        );
+
+    double second =
+        controller.update(
+            51.0,
+            50.0
+        );
+
+    double third =
+        controller.update(
+            51.0,
+            50.0
+        );
+
+    // After first update:
+    // E = 0.1
+    // u = 10 * (1 + 0.1) = 11
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        11.0,
+        first
+    );
+
+    // After second update:
+    // E = 0.2
+    // u = 12
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        12.0,
+        second
+    );
+
+    // After third update:
+    // E = 0.3
+    // u = 13
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        13.0,
+        third
+    );
+}
+
+// --------------------------------------------------
+// Saturation tests
+// --------------------------------------------------
+
+void test_positive_output_is_limited()
+{
+    PI_controller controller(
+        100.0,
+        1.0,
+        0.1
+    );
+
+    double output =
+        controller.update(
+            60.0,
+            50.0
+        );
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        255.0,
+        output
+    );
+}
+
+void test_negative_output_is_limited()
+{
+    PI_controller controller(
+        100.0,
+        1.0,
+        0.1
+    );
+
+    double output =
+        controller.update(
+            40.0,
+            50.0
+        );
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        -255.0,
+        output
+    );
+}
+
+// --------------------------------------------------
+// Anti-windup tests
+// --------------------------------------------------
+
+void test_positive_saturation_does_not_wind_up()
+{
+    PI_controller controller(
+        100.0,
+        1.0,
+        0.1
+    );
+
+    // Repeatedly demand an unreachable positive output.
+    for (int i = 0; i < 20; i++)
+    {
+        controller.update(
+            60.0,
+            50.0
+        );
+    }
+
+    // With anti-windup the large saturated error
+    // should not have accumulated.
+    //
+    // New error = +1
+    // E = 1 * 0.1 = 0.1
+    // u = 100 * (1 + 0.1) = 110
+
+    double output =
+        controller.update(
+            51.0,
+            50.0
+        );
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        110.0,
+        output
+    );
+}
+
+void test_negative_saturation_does_not_wind_up()
+{
+    PI_controller controller(
+        100.0,
+        1.0,
+        0.1
+    );
+
+    // Repeatedly demand an unreachable negative output.
+    for (int i = 0; i < 20; i++)
+    {
+        controller.update(
+            40.0,
+            50.0
+        );
+    }
+
+    // New error = -1
+    // E = -0.1
+    // u = 100 * (-1 - 0.1) = -110
+
+    double output =
+        controller.update(
+            49.0,
+            50.0
+        );
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        -110.0,
+        output
+    );
+}
+
+void test_controller_recovers_after_saturation()
+{
+    PI_controller controller(
+        100.0,
+        1.0,
+        0.1
+    );
+
+    // Cause positive saturation.
+    controller.update(
+        60.0,
+        50.0
+    );
+
+    // Return to a small error.
+    // Anti-windup should allow immediate recovery.
+    double output =
+        controller.update(
+            51.0,
+            50.0
+        );
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        110.0,
+        output
+    );
+}
+
+// --------------------------------------------------
+// Reset test
+// --------------------------------------------------
+
+void test_reset_clears_integral()
+{
+    PI_controller controller(
+        10.0,
+        1.0,
+        0.1
+    );
+
+    // Build up integral contribution.
+    controller.update(
+        51.0,
+        50.0
+    );
+
+    controller.update(
+        51.0,
+        50.0
+    );
+
+    // Clear stored integral.
+    controller.reset();
+
+    // This should now behave exactly like
+    // the first +1 error sample again.
+    //
+    // E = 0.1
+    // u = 10 * (1 + 0.1) = 11
+
+    double output =
+        controller.update(
+            51.0,
+            50.0
+        );
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        11.0,
+        output
+    );
+}
+
+// --------------------------------------------------
+// Polymorphism test
+// --------------------------------------------------
+
+void test_pi_controller_works_through_controller_interface()
+{
+    PI_controller pi(
+        10.0,
+        1.0,
+        0.1
+    );
+
+    // Access PI controller only through
+    // the common Controller interface.
+    Controller* controller =
+        &pi;
+
+    double output =
+        controller->update(
+            52.0,
+            50.0
+        );
+
+    TEST_ASSERT_DOUBLE_WITHIN(
+        0.001,
+        22.0,
+        output
+    );
+
+    TEST_ASSERT_EQUAL_STRING(
+        "PI",
+        controller->name()
+    );
+}
+
+// --------------------------------------------------
+// Test runner
+// --------------------------------------------------
+
+int main(int argc, char** argv)
+{
+    (void)argc;
+    (void)argv;
+
+    UNITY_BEGIN();
+
+    RUN_TEST(
+        test_zero_error_gives_zero_output
+    );
+
+    RUN_TEST(
+        test_positive_error_gives_positive_output
+    );
+
+    RUN_TEST(
+        test_negative_error_gives_negative_output
+    );
+
+    RUN_TEST(
+        test_integral_accumulates_over_time
+    );
+
+    RUN_TEST(
+        test_positive_output_is_limited
+    );
+
+    RUN_TEST(
+        test_negative_output_is_limited
+    );
+
+    RUN_TEST(
+        test_positive_saturation_does_not_wind_up
+    );
+
+    RUN_TEST(
+        test_negative_saturation_does_not_wind_up
+    );
+
+    RUN_TEST(
+        test_controller_recovers_after_saturation
+    );
+
+    RUN_TEST(
+        test_reset_clears_integral
+    );
+
+    RUN_TEST(
+        test_pi_controller_works_through_controller_interface
+    );
+
+    return UNITY_END();
+}

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/zephyr/CMakeLists.txt

@@ -0,0 +1,6 @@
+cmake_minimum_required(VERSION 3.13.1)
+include($ENV{ZEPHYR_BASE}/cmake/app/boilerplate.cmake NO_POLICY_SCOPE)
+project(A4.1.1-GPIO-in-Zephyr-RTOS)
+
+FILE(GLOB app_sources ../src/*.c*)
+target_sources(app PRIVATE ${app_sources})

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/zephyr/boards/nucleo_l432kc.overlay

@@ -0,0 +1,67 @@
+#include <zephyr/dt-bindings/gpio/gpio.h>
+#include <zephyr/dt-bindings/pwm/pwm.h>
+
+/ {
+    aliases {
+        sw1 = &user_button;
+
+        encoder-c1 = &encoder_c1;
+        encoder-c2 = &encoder_c2;
+
+        motor-ain1 = &motor_ain1;
+        motor-ain2 = &motor_ain2;
+
+        motor-flt = &motor_flt;
+
+        status-led = &led0;
+    };
+
+    buttons {
+        compatible = "gpio-keys";
+
+        user_button: button_0 {
+            gpios = <&gpiob 0 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+            label = "External button";
+        };
+    };
+
+    encoders {
+        encoder_c1: c1 {
+            gpios = <&gpioX X GPIO_ACTIVE_HIGH>;
+            label = "Encoder C1";
+        };
+
+        encoder_c2: c2 {
+            gpios = <&gpioX X GPIO_ACTIVE_HIGH>;
+            label = "Encoder C2";
+        };
+    };
+
+    motor {
+        motor_ain1: ain1 {
+            pwms = <&pwm1 1 PWM_HZ(8000) PWM_POLARITY_NORMAL>;
+            label = "Motor AIN1";
+        };
+
+        motor_ain2: ain2 {
+            pwms = <&pwm2 1 PWM_HZ(8000) PWM_POLARITY_NORMAL>;
+            label = "Motor AIN2";
+        };
+
+        motor_flt: flt {
+            gpios = <&gpioX X GPIO_ACTIVE_LOW>;
+            label = "Motor FLT";
+        };
+    };
+};
+
+&timers1 {
+    status = "okay";
+    st,prescaler = <79>;
+
+    pwm1: pwm {
+        status = "okay";
+        pinctrl-0 = <&tim1_ch1_pa8>;
+        pinctrl-names = "default";
+    };
+};

Project_4_Distributed_Control/Part_1_Porting_controller_to_Zephyr/zephyr/prj.conf

@@ -0,0 +1,2 @@
+CONFIG_GPIO=y
+CONFIG_PWM=y