Merging main with Isak_part2 branch

src/main.cpp

@@ -9,6 +9,7 @@
 
 #include "initialization_state.h"
 #include "operational_state.h"
+#include "stopped_state.h"
 
 
 RotaryEncoderDriver encoder;
@@ -24,6 +25,7 @@ InitializationState initialization_state;
 
 OperationalState operational_state;
 
+StoppedState stopped_state;
 
 // Stöðurnar verða að vera skilgreindar á undan motor_controller
 MotorController motor_controller(
@@ -51,6 +53,13 @@ int main()
     sei();
 
 
+    motor_controller.set_states(
+        &initialization_state,
+        &operational_state,
+        &stopped_state
+    );
+
+
     motor_controller.begin();
 
 

src/motor_controller.cpp

@@ -14,6 +14,7 @@ MotorController::MotorController(
     : current_state(nullptr),
       initialization_state(initialization),
       operational_state(operational),
+      stopped_state(stopped),
       encoder(encoder),
       motor(motor),
       controller(controller),
@@ -116,3 +117,12 @@ void MotorController::led_off()
 {
     led.set_lo();
 }
+void MotorController::to_stopped()
+{
+    transition_to(stopped_state);
+}
+
+bool MotorController::fault_active()
+{
+    return motor.fault_active();
+}

src/motor_driver.cpp

@@ -43,10 +43,16 @@ void MotorDriver::begin()
 {
     // Arduino D3  = PD3 = AIN1
     // Arduino D11 = PB3 = AIN2
+    // Arduino D4  = PD4 = FLT 
 
     DDRD |= (1 << DDD3);
     DDRB |= (1 << DDB3);
 
+    DDRD &= ~(1 << DDD4); 
+
+    PORTD |= (1 << PORTD4); // Enable pull-up resistor on D4 for part 2
+
+
     // Timer2 Fast PWM
     TCCR2A = 0;
     TCCR2B = 0;
@@ -116,3 +122,9 @@ void MotorDriver::set(double pwm)
         ain2_pwm(duty);
     }
 }
+
+
+bool MotorDriver::fault_active()
+{
+    return !(PIND & (1 << PIND4));
+}

src/operational_state.cpp

@@ -11,9 +11,26 @@ void OperationalState::enter()
     context->led_on();
 }
 
+// Part 1 
+
+//void OperationalState::update()
+//{
+//    context->run_speed_controller();
+//}
+
+// Part 2
 
 void OperationalState::update()
 {
+    if (context->fault_active())
+    {
+        Serial.println("Fault detected");
+
+        context->to_stopped();
+
+        return;
+    }
+
     context->run_speed_controller();
 }
 

src/stopped_state.cpp

@@ -0,0 +1,70 @@
+#include "stopped_state.h"
+#include "motor_controller.h"
+
+#include <Arduino.h>
+
+
+StoppedState::StoppedState()
+    : previous_time(0),
+      led_state(false)
+{
+}
+
+
+void StoppedState::enter()
+{
+    Serial.println("State: Stopped");
+
+    context->stop_motor();
+
+    led_state = false;
+
+    digitalWrite(LED_BUILTIN, LOW);
+
+    previous_time = millis();
+}
+
+// Controlling the blinking of the LED @ 2Hz
+
+void StoppedState::update()
+{
+    unsigned long current_time = millis();
+
+    if (current_time - previous_time >= 250)
+    {
+        previous_time = current_time;
+
+        led_state = !led_state;
+
+        digitalWrite(
+            LED_BUILTIN,
+            led_state ? HIGH : LOW
+        );
+    }
+}
+
+
+// Commands for Stopped [ r = reset and o for operational]
+
+void StoppedState::command(char c)
+{
+    if (c == 'r' || c == 'R')
+    {
+        Serial.println("Command: reset");
+
+        context->to_initialization();
+    }
+
+    else if (c == 'o' || c == 'O')
+    {
+        Serial.println("Command: set operational");
+
+        context->to_operational();
+    }
+}
+
+
+void StoppedState::exit()
+{
+    digitalWrite(LED_BUILTIN, LOW);
+}