From f4283353a21867dfdf15dd6427c27ab4d3f54533 Mon Sep 17 00:00:00 2001 From: Joe Foley Date: Tue, 11 Aug 2026 22:02:54 +0000 Subject: [PATCH] reminder to use ssh while updating --- README.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/README.md b/README.md index 2e38861..a37f2c0 100644 --- a/README.md +++ b/README.md @@ -6,8 +6,10 @@ Scripts and documentation for setting up a Raspberry Pi (Zero W 1 or 2) for use 1. [Raspberry Pi Imager procedure to setup ssh and Raspberry Pi Connect](imager.md) 1. Find out your Pi's ethernet addresss in case you need to find it on `iot-research` again. Type `ip addr show dev wlan0` and for something like `link/ether 01:23:45:67:89:ab`. Write this information (the 12 characters and colons) in your notebook. In T-411-MECH we want you to put this information in a spreadsheet links from the main page: this allows us connect Pi's to people in case of any issues. 1. [Solder the GPIO header pins](solder-gpio.md) +1. Login to the pi using ssh or serial. (Pi Connect breaks wihle upgrading the Pi Connect program). You will be doing updates as part of the next procedure. 1. [Gadget Mode to setup a serial connection over USB](gadget.md) 1. [Marcel's script on github to show the IP address on the OLED screen](https://github.com/mkyas/cpsy-display-ip) + 1. Install Blinka by following the guide [CircuitPython Libraries on Linux and Raspberry Pi](https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi)] ## RU student-only guides at ROB-IOT