RU-V207/rover-pi
5
1
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Tested. IT works. Updating directions to enable and disable

Browse Source
This commit is contained in:
foley
2026-09-04 16:08:27 +00:00
parent e6a0556147
commit a73e40b960
1 changed files with 9 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files
gadget.md
+9 -3
View File
@@ -88,9 +88,15 @@ This is similar to the procedure for accessing an Arduino.
# Enabling/Disabling the OTG mode to use a keyboard and mouse again
**WARNING: Untested**
1. Disable: Delete a file called `GADGET_MODE` in the boot partition/drive when not on a pi. If the Pi is booted, you can delete `sudo rm /boot/firmware/GADGET_MODE` and reboot
1. Enable: create a file called `GADGET_MODE` in the boot partition/drive when not on a pi. If the Pi is booted, you can create `sudo touch /boot/firmware/GADGET_MODE` and reboot
## Disable
1. Remove the SD card and access it on your computer
1. Delete the file called `GADGET_MODE` in the boot partition/drive usually called `bootfs`.
1. If the Pi is booted, you can `sudo rm /boot/firmware/GADGET_MODE` and reboot.
## Enable
1. Remove the SD card and access it on your computer
1. Create a file called `GADGET_MODE` in the boot partition/drive called `bootfs`.
2. If the Pi is booted, you can `sudo touch /boot/firmware/GADGET_MODE` and reboot
# Connecting over the USB ethernet to ssh into your Pi