CNC Foam cutter weekly meeting minutes:
2011-07-12 10:10

Present: sveinn, fannar, luis

TODO: 	We have to fill the wiki with the useful information we find.
		We need another endstop.

Proceedings:

	[Foam cutter]
Luis < We were testing the machine to check if it was working, some adjustments were needed in the thingomatic.xml file, I tried to make a hexagon in parallel, it worked. We have problems to recognize the endstops. We changed the voltage of the steppers to give them more power. >

Fannar < We mounted the endstops. We disassemble and assemble the machine to make it more smooth. New motor connections, cause the others didn’t fit well enough. Ask Joe about another Endstop. We are not sure, but maybe the motors won't have power enough. We will maybe need only two, cause the vertical axes have enough strength, but it will need to be tested. >

Sveinn < Everything is ready but to put something in the bottom to keep the piece stuck, and the endstop missed. And we have to finish the appearance of the machine, to make it look better.
We have the components to create the endstops, but not the assemble piece, maybe Hrannar can assemble.>

[Hydraulic press]
Sveinn <Today we are working in Hydraulic press. Last week we disassemble the hydraulic pump. And now we are going to clean the pump.>

	[GCode program]
Luis <I thought about the new algorithm to do the program, and started with the GUI. I hope to have most of the program completed for the next week.>


....


Meeting ended at 10:22
$HeadURL$