RU-V207/Altium
4
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

grouped the PCB layout steps

Browse Source
This commit is contained in:
foley
2026-09-08 22:52:12 +00:00
parent 951d2d3f2f
commit e642d6aa71
1 changed files with 16 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files
README.md
+16 -15
View File
@@ -98,25 +98,26 @@ These ensure that the vendor can make the board and the Design Rule Checker will
4. Click OK 4. Click OK
4. Click on the new "Power" class of nets 4. Click on the new "Power" class of nets
4. Look at the bottom and set the Min: 0.5mm, Prefer 5.0mm, Max 0.9mm for some big traces 4. Look at the bottom and set the Min: 0.5mm, Prefer 5.0mm, Max 0.9mm for some big traces
2. Setup the layers of the board. ## Layout the board
1. Setup the layers of the board.
1. RU CNC: Suggest doing it in one layer with jumper wires. Autoroute has an option for this. 1. RU CNC: Suggest doing it in one layer with jumper wires. Autoroute has an option for this.
3. Most projects: 2 layer is cheapest and enough for most projects 2. Most projects: 2 layer is cheapest and enough for most projects
3. Fit in small space or lots of connections: 4 layers is commonly used on most modern devices 2. Fit in small space or lots of connections: 4 layers is commonly used on most modern devices
2. Manually route wires (or use Autorouting, my favorite) to place all the wires. 1. Manually route wires (or use Autorouting, my favorite) to place all the wires.
2. If you need mounting holes, create Pads with a hole of the size you want 1. If you need mounting holes, create Pads with a hole of the size you want
1. You'll have to assign it an identifier (such as S1, S2, S3,..) and match it to a pin in the "Pins" list 1. You'll have to assign it an identifier (such as S1, S2, S3,..) and match it to a pin in the "Pins" list
3. Edit the schematic symbol and put the new pins slightly off the symbol 2. Edit the schematic symbol and put the new pins slightly off the symbol
3. Click on a blank spot 2. Click on a blank spot
3. Properties: Pins tab > click on the pencil to edit 2. Properties: Pins tab > click on the pencil to edit
3. Uncheck the boxes for Show, Number, and Name on the mounting hole pads to hide them 2. Uncheck the boxes for Show, Number, and Name on the mounting hole pads to hide them
3. If the hole is bigger than 2.5mm, you'll have to increase the max hole constraint 2. If the hole is bigger than 2.5mm, you'll have to increase the max hole constraint
1. Constraint Manager > All Rules 1. Constraint Manager > All Rules
4. Scroll to Manufacturing > Hole size 3. Scroll to Manufacturing > Hole size
4. Expand "Advanced Rules" 3. Expand "Advanced Rules"
4. Increase the maximum to your mounting hole size 3. Increase the maximum to your mounting hole size
2. Check for Design Rule violations and fix them 1. Check for Design Rule violations and fix them
1. Tools > Design Rule Check 1. Tools > Design Rule Check
3. Click "Run Design Rule Check" which is on the bottom left! OK will just close the dialog. 2. Click "Run Design Rule Check" which is on the bottom left! OK will just close the dialog.
## Output the job to send to the PCB manufacturer ## Output the job to send to the PCB manufacturer
Create an Outjob to produce the files the PCB manufacturer wants (Gerber and NC drill usually) Create an Outjob to produce the files the PCB manufacturer wants (Gerber and NC drill usually)