diff --git a/README.md b/README.md
index ae34535..30e1815 100644
--- a/README.md
+++ b/README.md
@@ -86,38 +86,38 @@ Their headquarters is in Belgium.
 
 # Setup the Constraints 
 These ensure that the vendor can make the board and the Design Rule Checker will catch the mistakes.  Your chances of having a working board are very low if you skip this step!
-        Design > Constraint Manager
-        Clearances > All Nets
-            Click on the dimension and set it to "0.2mm".  You can go as small as 0.1mm if you are using the 1Oz AllPCB copper.
-        Physical > All Nets
-            Click on "Min Width" and look at the bottom of the screen 
-            Most manufacturers can handle Min: 0.2mm, Prefer: 2.5mm Max 2.5  as a default
-        Power nets might want to have larger traces:
-            Right click on "All Nets" > Classes > Add Class > Net Class
-            Set the class as "Power"
-            Select all the nets such as "GND" and "3V3" in Non-members and click ">" to make them members
-            Click OK
-            Click on the new "Power" class of nets
-            Look at the bottom and set the Min: 0.5mm, Prefer 5.0mm, Max 0.9mm for some big traces
-    Setup the layers of the board.
-        RU CNC:  Suggest doing it in one layer with jumper wires.  Autoroute has an option for this.
-        Most projects:  2 layer is cheapest and enough for most projects
-        Fit in small space or lots of connections:  4 layers is commonly used on most modern devices
-    Manually route wires (or use Autorouting, my favorite) to place all the wires.
-    If you need mounting holes, create Pads with a hole of the size you want
-        You'll have to assign it an identifier (such as S1, S2, S3,..) and match it to a pin in the "Pins" list
-        Edit the schematic symbol and put the new pins slightly off the symbol
-        Click on a blank spot
-        Properties:  Pins tab > click on the pencil to edit
-        Uncheck the boxes for Show, Number, and Name on the mounting hole pads to hide them
-        If the hole is bigger than 2.5mm, you'll have to increase the max hole constraint
-            Constraint Manager > All Rules
-            Scroll to Manufacturing > Hole size
-            Expand "Advanced Rules"
-            Increase the maximum to your mounting hole size
-    Check for Design Rule violations and fix them
-        Tools > Design Rule Check
-        Click "Run Design Rule Check" which is on the bottom left!  OK will just close the dialog.
+1. Design > Constraint Manager
+    1. Clearances > All Nets
+    2. Click on the dimension and set it to "0.2mm".  You can go as small as 0.1mm if you are using the 1Oz AllPCB copper.
+    2. Physical > All Nets
+        1. Click on "Min Width" and look at the bottom of the screen 
+        3. Most manufacturers can handle Min: 0.2mm, Prefer: 2.5mm Max 2.5  as a default
+        3. Power nets might want to have larger traces:
+		    1. Right click on "All Nets" > Classes > Add Class > Net Class
+            4. Set the class as "Power"
+            4. Select all the nets such as "GND" and "3V3" in Non-members and click ">" to make them members
+            4. Click OK
+            4. Click on the new "Power" class of nets
+            4. Look at the bottom and set the Min: 0.5mm, Prefer 5.0mm, Max 0.9mm for some big traces
+    2. Setup the layers of the board.
+        1. RU CNC:  Suggest doing it in one layer with jumper wires.  Autoroute has an option for this.
+        3. Most projects:  2 layer is cheapest and enough for most projects
+        3. Fit in small space or lots of connections:  4 layers is commonly used on most modern devices
+    2. Manually route wires (or use Autorouting, my favorite) to place all the wires.
+    2. If you need mounting holes, create Pads with a hole of the size you want
+        1. You'll have to assign it an identifier (such as S1, S2, S3,..) and match it to a pin in the "Pins" list
+        3. Edit the schematic symbol and put the new pins slightly off the symbol
+        3. Click on a blank spot
+        3. Properties:  Pins tab > click on the pencil to edit
+        3. Uncheck the boxes for Show, Number, and Name on the mounting hole pads to hide them
+        3. If the hole is bigger than 2.5mm, you'll have to increase the max hole constraint
+            1. Constraint Manager > All Rules
+            4. Scroll to Manufacturing > Hole size
+            4. Expand "Advanced Rules"
+            4. Increase the maximum to your mounting hole size
+    2. Check for Design Rule violations and fix them
+        1. Tools > Design Rule Check
+        3. Click "Run Design Rule Check" which is on the bottom left!  OK will just close the dialog.
 		
 ## Output the job to send to the PCB manufacturer
     Create an Outjob to produce the files the PCB manufacturer wants (Gerber and NC drill usually)