diff --git a/README.md b/README.md
index 918792d..1bb27c0 100644
--- a/README.md
+++ b/README.md
@@ -30,22 +30,22 @@ Altium Designer is an expensive professional-grade ECAD software for schematic c
     * If they are missing, you will need to import them from the Manufacturer and/or create schematic symbols and footprints
 1. Drag them onto your Schematic
 1. Connect them together with appropriate wires and busses
-        Unattached inputs (for components with internal pullup/pulldown) can be left floating with a "NO ERC" marker
-    Project > Validate  and look at the output in Messages
-    Test your circuit using a breadboard.  THIS IS VERY IMPORTANT to avoid wasting time later!
-    Create a new PCB document in your project (Of note, the 2026 rover's plate has a size of 100x135mm (4x5.3 inches)
-        View > Board Planning Mode
-        Design > Edit Board shape
-        Drag handles until the size is what you want
-        View > 2D Layer Mode
-        Add a "keepout" line around the board if you want to use the Autorouter to avoid it routing off the board
-    Import the components from the Schematic by:  Design > Import Changes from ...
-        It will create an Engineering Change popup showing the operations it will do
-        Click Validate  (look for red X's for possible issues)
-        Click Execute
-    Pick a PCB manufacturer.  This will determine the options for traces and vias.  Some options in no particular order:
-        AllPCB (as of 2026-06-15)Links to an external site.
-            Manufacturing capabilities at https://www.allpcb.com/advanced_pcb_manufacturing_capability.htmlLinks to an external site.
+    * Unattached inputs (for components with internal pullup/pulldown) can be left floating with a "NO ERC" marker
+1. Project > Validate  and look at the output in Messages
+1. Test your circuit using a breadboard.  **THIS IS VERY IMPORTANT to avoid wasting time later!**
+1. Create a new PCB document in your project (Of note, the 2026 rover's plate has a size of 100x135mm (4x5.3 inches)
+      2. View > Board Planning Mode
+      2. Design > Edit Board shape
+      2. Drag handles until the size is what you want
+      2. View > 2D Layer Mode
+      2. Add a "keepout" line around the board if you want to use the Autorouter to avoid it routing off the board
+1. Import the components from the Schematic by:  Design > Import Changes from ...
+      2. It will create an Engineering Change popup showing the operations it will do
+      2. Click Validate  (look for red X's for possible issues)
+      2. Click Execute
+1. Pick a PCB manufacturer.  This will determine the options for traces and vias.  Some options in no particular order:
+        AllPCB (as of 2026-06-15)
+            Manufacturing capabilities at https://www.allpcb.com/advanced_pcb_manufacturing_capability.html
             Drill hole size:  0.15-6.5mm
             Minimum via/pad:   Double-side board: 0.2mm (inner diameter)/0.5mm (outer diameter) Multi-layer board: 0.15mm (inner diameter)/0.25mm (outer diameter) ①The outer diameter must be 0.1mm larger than the inner diameter, 0.15mm preferred ②Preferred Min. Via hole size: 0.2mm
             Minimum trace: This depends up on the copper thickness! (1OZ copper) 0.076/0.076mm(3mil/3mil).  Tolerance is 20% so you probably want to set the width to 1mm