127 lines
3.3 KiB
Plaintext
127 lines
3.3 KiB
Plaintext
/* DVD IR Synchronizer for Toshiba SD590EKE
|
|
* Developed for Art Installation "Dawn" by Sigrun Hardardottir<sigrun@stalverk.is>
|
|
* Code written by Joe Foley <foley@ru.is>
|
|
* on 2013-09-08
|
|
*
|
|
* Requires libraries:
|
|
* Arduino-IRremote https://github.com/shirriff/Arduino-IRremote
|
|
*
|
|
* IR Remote codes from SE-R0313
|
|
* http://lirc.sourceforge.net/remotes/toshiba/SE-R0313
|
|
*
|
|
* The IRremote library uses Pin 3 for the Anode (longer pin)
|
|
* We have made a ground pin on Pin 4 for the Cathode (shorter pin)
|
|
*/
|
|
|
|
|
|
#include <IRremote.h>
|
|
|
|
int pinGND=4; // Longer leg on the IR LED
|
|
int pinLED=13; // The heartbeat LED on the board
|
|
|
|
int heartbeat=0;
|
|
int secs;
|
|
int playtime= 6*60+9; // set here ypur DVD title playtime in sec leave a little extra
|
|
//int playtime= 10; // testing
|
|
|
|
IRsend irsend;
|
|
|
|
void setup() {
|
|
pinMode(pinGND,OUTPUT);
|
|
pinMode(pinLED,OUTPUT);
|
|
Serial.begin(115200);
|
|
|
|
Serial.println("Toshiba DVD SD590EKE Synchronizer $Rev$");
|
|
Serial.println("For \"Dawn\" by Sigrun Hardardottir");
|
|
Serial.println("Code by Joe Foley <foley@ru.is>");
|
|
Serial.println("$URL$");
|
|
Serial.println("$Id$");
|
|
Serial.print("Playtime: ");
|
|
secs=playtime;
|
|
Serial.print("sec:");
|
|
Serial.print(secs);
|
|
Serial.print(" / mm:ss ");
|
|
Serial.print(secs/60);
|
|
Serial.print(":");
|
|
Serial.print(secs % 60);
|
|
Serial.println("");
|
|
|
|
// The DVD player starts playing automatically, so we should pause it
|
|
send_pause();
|
|
waitsec(2);
|
|
secs=playtime;
|
|
|
|
}
|
|
|
|
/********************************************************************/
|
|
void loop() {
|
|
Serial.println("Sync");
|
|
send_previous();
|
|
waitsec(2);
|
|
|
|
send_play();
|
|
for(int t = 0; t < playtime; t++) {
|
|
// This will not give us perfect 1 second timing
|
|
// but it is good enough for most video applications
|
|
// The most critical is having everything start at the
|
|
// same time.
|
|
Serial.print("sec:");
|
|
Serial.print(playtime);
|
|
Serial.print(" / mm:ss ");
|
|
Serial.print(t/60);
|
|
Serial.print(":");
|
|
Serial.print(t % 60);
|
|
Serial.println("");
|
|
if (heartbeat == 1) {
|
|
digitalWrite(pinLED, HIGH);
|
|
heartbeat = 0;
|
|
}
|
|
else {
|
|
digitalWrite(pinLED, LOW);
|
|
heartbeat = 1;
|
|
}
|
|
delay(1000);
|
|
}
|
|
|
|
send_pause();
|
|
waitsec(1);
|
|
|
|
}
|
|
|
|
/**************************************************************/
|
|
void waitsec(int sec) {
|
|
Serial.print("Wait ");
|
|
Serial.print(sec);
|
|
Serial.println(" seconds");
|
|
delay(sec*1000);
|
|
}
|
|
|
|
|
|
/********************************************************************/
|
|
void send_stop() {
|
|
// First comes the pre-data bits, then the command code
|
|
Serial.println(" stop");
|
|
irsend.sendNEC(0xA25D28D7,32);
|
|
}
|
|
|
|
/********************************************************************/
|
|
void send_play() {
|
|
// First comes the pre-data bits, then the command code
|
|
Serial.println(" play");
|
|
irsend.sendNEC(0xA25DA857,32);
|
|
}
|
|
|
|
/********************************************************************/
|
|
void send_pause() {
|
|
// First comes the pre-data bits, then the command code
|
|
Serial.println(" pause");
|
|
irsend.sendNEC(0xA25D00FF, 32);
|
|
}
|
|
|
|
/********************************************************************/
|
|
void send_previous() {
|
|
// First comes the pre-data bits, then the command code
|
|
Serial.println(" previous");
|
|
irsend.sendNEC(0xA25DC43B, 32);
|
|
}
|