/* Philips DVD player codefinder
 * Code written by Joe Foley <foley@ru.is>
 * on 2013-09-08
 *
 * Requires libraries:
 *  Arduino-IRremote https://github.com/shirriff/Arduino-IRremote
 *   Instructions http://www.righto.com/2009/08/multi-protocol-infrared-remote-library.html
 *
 *  The IRremote library uses Pin 3 for the Anode (longer pin)
 *  We have made a ground pin on Pin 4 for the Cathode (shorter pin)
 */


#include <IRremote.h>

int pinGND=4;  // Longer leg on the IR LED
int pinLED=13; // The heartbeat LED on the board


IRsend irsend;
unsigned long testcode;
void setup() {
  pinMode(pinGND,OUTPUT);
  pinMode(pinLED,OUTPUT);
  Serial.begin(115200);

  Serial.println("Philips Codefinder $Rev$");
  Serial.println("Code by Joe Foley <foley@ru.is>");
  Serial.println("$URL$");
  Serial.println("$Id$");
  
}

/********************************************************************/
void loop() {
  for (int address = 0; address < 0x100; address++) {
    for (int command = 0; command < 0x100; command++) {
    Serial.print("address: ");
    Serial.print(address, HEX);
    Serial.print(" command:  ");
    Serial.print(command, HEX);
    testcode = ( address << 16 ) + command;
    Serial.print(" testcode:  ");
      Serial.println(testcode, HEX);
      irsend.sendRC6(testcode, 16);
    }
  }

}

/**************************************************************/
void waitsec(int sec) {
  Serial.print("Wait ");
  Serial.print(sec);
  Serial.println(" seconds");
  delay(sec*1000);
}