/* DVD IR Synchronizer for Toshiba SD590EKE V1.0 * Developed for Art Installation "Dawn" by Sigrun Hardardottir * Code written by Joe Foley * on 2013-09-08 * * Based upon Sychronizer code by * KHM 2010 / Martin Nawrath * Kunsthochschule fuer Medien Koeln * Academy of Media Arts Cologne * * Requires libraries: * MsTimer2 http://playground.arduino.cc/Main/MsTimer2 * Arduino-IRremote https://github.com/shirriff/Arduino-IRremote * * The IRremote library uses Pin 3 for the Anode (longer pin) * We have made a ground pin on Pin 4 for the Cathode (shorter pin) */ #include #include int pinGND=4; // Longer leg on the IR LED int secs; int playtime= 6*60+9; // set here ypur DVD title playtime in sec leave a little extra //int playtime= 10; // testing IRsend irsend; void setup() { pinMode(pinGND,OUTPUT); Serial.begin(115200); Serial.println("Toshiba DVD SD590EKE Synchronizer $Rev$"); Serial.println("For \"Dawn\" by Sigrun Hardardottir"); Serial.println("Code by Joe Foley "); Serial.println("$URL$"); Serial.println("$Id$"); Serial.print("Playtime: "); secs=playtime; Serial.print("sec:"); Serial.print(secs); Serial.print(" / mm:ss "); Serial.print(secs/60); Serial.print(":"); Serial.print(secs % 60); Serial.println(""); Serial.println("play"); send_play(); Serial.println("wait 7 seconds"); delay(7000); secs=playtime; } /********************************************************************/ void loop() { Serial.println("Sync"); Serial.println(" pause"); send_pause(); delay(2000); Serial.println(" skip"); send_previous(); delay(2000); Serial.println(" play"); send_play(); for(int t = 0; t < playtime; t++) { Serial.print("sec:"); Serial.print(playtime); Serial.print(" / mm:ss "); Serial.print(t/60); Serial.print(":"); Serial.print(t % 60); Serial.println(""); delay(1000); } } /********************************************************************/ void send_stop() { // First comes the pre-data bits, then the command code irsend.sendNEC(0xA25D28D7,32); } /********************************************************************/ void send_play() { // First comes the pre-data bits, then the command code irsend.sendNEC(0xA25DA857,32); } /********************************************************************/ void send_pause() { // First comes the pre-data bits, then the command code irsend.sendNEC(0xA25D00FF, 32); } /********************************************************************/ void send_previous() { // First comes the pre-data bits, then the command code irsend.sendNEC(0xA25DC43B, 32); }