unified the code to use the Time and TimeAlarm libraries. This simplifies the code greatly and should improve the accuracy.
This commit is contained in:
foley@ru.is
@@ -1,13 +1,17 @@
|
||||
/* DVD IR Synchronizer for Philips DVP3142/12
|
||||
* Code written by Joe Foley <foley@ru.is>
|
||||
* on 2013-09-08
|
||||
*
|
||||
const String DESCRIPTION="IR Synchronizer for Philips DVP3142/12";
|
||||
const String AUTHOR="Joe Foley <foley@ru.is>";
|
||||
const String SVN_REVISION="$Rev$";
|
||||
const String SVN_URL="$URL$";
|
||||
const String SVN_ID="$Id$";
|
||||
/* Code written by Joe Foley <foley@ru.is> on 2013-09-08
|
||||
*
|
||||
* Requires libraries:
|
||||
* Arduino-IRremote https://github.com/shirriff/Arduino-IRremote
|
||||
* Instructions http://www.righto.com/2009/08/multi-protocol-infrared-remote-library.html
|
||||
* Streaming http://arduiniana.org/libraries/streaming/
|
||||
* Time http://www.pjrc.com/teensy/td_libs_Time.html
|
||||
* TimeAlarms http://www.pjrc.com/teensy/td_libs_TimeAlarms.html
|
||||
*
|
||||
* IR Remote codes from IRrecvDemo
|
||||
* Instructions http://www.righto.com/2009/08/multi-protocol-infrared-remote-library.html
|
||||
*
|
||||
* Details on the Philips RC6 coding
|
||||
* http://www.pcbheaven.com/userpages/The_Philips_RC6_Protocol/
|
||||
@@ -16,47 +20,74 @@
|
||||
* We have made a ground pin on Pin 4 for the Cathode (shorter pin)
|
||||
*/
|
||||
|
||||
|
||||
#include <IRremote.h>
|
||||
|
||||
int pinGND=4; // Longer leg on the IR LED
|
||||
#include <Streaming.h>
|
||||
#include <Time.h>
|
||||
#include <TimeAlarms.h>
|
||||
// IR LED pin 3 should be the longer leg
|
||||
int pinGND=4; // Shorter leg on the IR LED
|
||||
int pinLED=13; // The heartbeat LED on the board
|
||||
|
||||
int heartbeat=0;
|
||||
int secs;
|
||||
int playtime=1*60+1; // Play time in seconds, you usually leave off a second or two
|
||||
// Fill this information in so that it will be easy to identify later
|
||||
String INST_NAME="<TITLE>";
|
||||
String ARTIST="<ARTIST>";
|
||||
String YEAR="<YEAR>";
|
||||
int videotime = 1*60+1; // set here your DVD title playtime in seconds
|
||||
int choptime = 3; // how much to chop at the end if the videos are
|
||||
// not exactly the same length
|
||||
int playtime = videotime - choptime;
|
||||
int resetdelay = 3; // seconds from reset to playing from beginning
|
||||
|
||||
IRsend irsend;
|
||||
int alarm_bell = false;
|
||||
int heartbeat_state=0;
|
||||
|
||||
void showtime(int secs) { Serial << "sec:" << secs << " / mm:ss " << secs/60 << ":" << secs % 60 << endl;}
|
||||
void trigger_sync() { alarm_bell = true; }
|
||||
|
||||
void setup() {
|
||||
pinMode(pinGND,OUTPUT);
|
||||
pinMode(pinLED,OUTPUT);
|
||||
Serial.begin(115200);
|
||||
setTime(23,15,16,1,14,14); // set time to 23:15:16 Jan 14 2014
|
||||
|
||||
Serial.println("Panasonic DVD DVP-3142/12 Synchronizer $Rev$");
|
||||
Serial.println("For \"$INSTALLATION NAME$\" by $ARTIST$ ($YEAR$)");
|
||||
Serial.println("Code by Joe Foley <foley@ru.is>");
|
||||
Serial.println("$URL$");
|
||||
Serial.println("$Id$");
|
||||
Serial.print("Playtime: ");
|
||||
secs=playtime;
|
||||
Serial.print("sec:");
|
||||
Serial.print(secs);
|
||||
Serial.print(" / mm:ss ");
|
||||
Serial.print(secs/60);
|
||||
Serial.print(":");
|
||||
Serial.print(secs % 60);
|
||||
Serial.println("");
|
||||
Serial << DESCRIPTION << " " << SVN_REVISION << endl;
|
||||
Serial << "Code by " << AUTHOR << endl;
|
||||
Serial << "For \""<< INST_NAME << "\" by "<< ARTIST <<"(" << YEAR << ")" << endl;
|
||||
Serial << SVN_URL << endl << SVN_ID << endl;
|
||||
Serial << "Playtime: " << playtime << endl;
|
||||
sync();
|
||||
showtime(playtime);
|
||||
|
||||
secs=playtime;
|
||||
Alarm.timerRepeat(playtime, trigger_sync);
|
||||
send_play();
|
||||
}
|
||||
|
||||
/********************************************************************/
|
||||
void loop() {
|
||||
Serial.println("Sync");
|
||||
if (alarm_bell == true) {
|
||||
sync();
|
||||
alarm_bell = false;
|
||||
}
|
||||
heartbeat();
|
||||
}
|
||||
|
||||
void heartbeat() {
|
||||
if (heartbeat_state == 1) {
|
||||
digitalWrite(pinLED, HIGH);
|
||||
heartbeat_state = 0;
|
||||
}
|
||||
else {
|
||||
digitalWrite(pinLED, LOW);
|
||||
heartbeat_state = 1;
|
||||
}
|
||||
Alarm.delay(1000);
|
||||
}
|
||||
|
||||
void sync() {
|
||||
Serial << "Sync" << endl;
|
||||
//send_pause();
|
||||
//waitsec(2);
|
||||
//waitsec(resetdelay);
|
||||
|
||||
// The three players don't always see the "previous command" so we send it multiple times
|
||||
send_previous();
|
||||
@@ -66,58 +97,34 @@ void loop() {
|
||||
// Don't send play because previous automatically starts it
|
||||
// If we hit play it will merely pause it.
|
||||
//send_play();
|
||||
|
||||
for(int t = 0; t < playtime; t++) {
|
||||
// This will not give us perfect 1 second timing
|
||||
// but it is good enough for most video applications
|
||||
// The most critical is having everything start at the
|
||||
// same time.
|
||||
Serial.print("sec:");
|
||||
Serial.print(playtime);
|
||||
Serial.print(" / mm:ss ");
|
||||
Serial.print(t/60);
|
||||
Serial.print(":");
|
||||
Serial.print(t % 60);
|
||||
Serial.println("");
|
||||
if (heartbeat == 1) {
|
||||
digitalWrite(pinLED, HIGH);
|
||||
heartbeat = 0;
|
||||
}
|
||||
else {
|
||||
digitalWrite(pinLED, LOW);
|
||||
heartbeat = 1;
|
||||
}
|
||||
delay(1000);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**************************************************************/
|
||||
void waitsec(int sec) {
|
||||
Serial.print("Wait ");
|
||||
Serial.print(sec);
|
||||
Serial.println(" seconds");
|
||||
delay(sec*1000);
|
||||
}
|
||||
|
||||
/**************************************************************/
|
||||
void waitsec(int sec) {
|
||||
Serial << "Wait " << sec << " seconds" << endl;
|
||||
Alarm.delay(sec*1000);
|
||||
}
|
||||
|
||||
/********************************************************************/
|
||||
void send_stop() {
|
||||
// First comes the pre-data bits, then the command code
|
||||
Serial.println(" stop");
|
||||
Serial << " stop" << endl;
|
||||
irsend.sendRC6(0x10431,20);
|
||||
}
|
||||
|
||||
/********************************************************************/
|
||||
void send_play() {
|
||||
// First comes the pre-data bits, then the command code
|
||||
Serial.println(" play");
|
||||
Serial << " play" << endl;
|
||||
irsend.sendRC6(0x1042C,20);
|
||||
}
|
||||
|
||||
/********************************************************************/
|
||||
void send_pause() {
|
||||
// First comes the pre-data bits, then the command code
|
||||
Serial << " step/pause" << endl;
|
||||
Serial.println(" pause");
|
||||
irsend.sendRC6(0x1042C,20);
|
||||
}
|
||||
|
||||
@@ -1,60 +1,97 @@
|
||||
/* DVD IR Synchronizer for Philips DVP3142/12
|
||||
* Code written by Joe Foley <foley@ru.is>
|
||||
* on 2013-09-08
|
||||
*
|
||||
const String DESCRIPTION="IR Synchronizer for Scott DVX605 HD(Rev2)";
|
||||
const String AUTHOR="Joe Foley <foley@ru.is>";
|
||||
const String SVN_REVISION="$Rev$";
|
||||
const String SVN_URL="$URL$";
|
||||
const String SVN_ID="$Id$";
|
||||
/* Code written by Joe Foley <foley@ru.is> on 2013-09-08
|
||||
*
|
||||
* Requires libraries:
|
||||
* Arduino-IRremote https://github.com/shirriff/Arduino-IRremote
|
||||
* Instructions http://www.righto.com/2009/08/multi-protocol-infrared-remote-library.html
|
||||
* Streaming http://arduiniana.org/libraries/streaming/
|
||||
* Time http://www.pjrc.com/teensy/td_libs_Time.html
|
||||
* TimeAlarms http://www.pjrc.com/teensy/td_libs_TimeAlarms.html
|
||||
*
|
||||
* IR Remote codes from IRrecvDemo
|
||||
* Instructions http://www.righto.com/2009/08/multi-protocol-infrared-remote-library.html
|
||||
*
|
||||
* Details on the Philips RC6 coding
|
||||
* http://www.pcbheaven.com/userpages/The_Philips_RC6_Protocol/
|
||||
*
|
||||
* The IRremote library uses Pin 3 for the Anode (longer pin)
|
||||
* We have made a ground pin on Pin 4 for the Cathode (shorter pin)
|
||||
*/
|
||||
|
||||
|
||||
#include <IRremote.h>
|
||||
|
||||
int pinGND=4; // Longer leg on the IR LED
|
||||
#include <Streaming.h>
|
||||
#include <Time.h>
|
||||
#include <TimeAlarms.h>
|
||||
// IR LED pin 3 should be the longer leg
|
||||
int pinGND=4; // Shorter leg on the IR LED
|
||||
int pinLED=13; // The heartbeat LED on the board
|
||||
|
||||
int heartbeat=0;
|
||||
int secs;
|
||||
int playtime= 1*60+1; // Play time in seconds, you usually leave off a second or two
|
||||
// Fill this information in so that it will be easy to identify later
|
||||
String INST_NAME="<TITLE>";
|
||||
String ARTIST="<ARTIST>";
|
||||
String YEAR="<YEAR>";
|
||||
int videotime = 1*60+1; // set here your DVD title playtime in seconds
|
||||
int choptime = 3; // how much to chop at the end if the videos are
|
||||
// not exactly the same length
|
||||
int playtime = videotime - choptime;
|
||||
int resetdelay = 3; // seconds from reset to playing from beginning
|
||||
|
||||
IRsend irsend;
|
||||
int alarm_bell = false;
|
||||
int heartbeat_state=0;
|
||||
|
||||
void showtime(int secs) {
|
||||
Serial << "sec:" << secs << " / mm:ss " << secs/60 << ":" << secs % 60 << endl;
|
||||
}
|
||||
void trigger_sync() { alarm_bell = true; }
|
||||
|
||||
void setup() {
|
||||
pinMode(pinGND,OUTPUT);
|
||||
pinMode(pinLED,OUTPUT);
|
||||
Serial.begin(115200);
|
||||
setTime(23,15,16,1,14,14); // set time to 23:15:16 Jan 14 2014
|
||||
|
||||
Serial.println("Scott DVX605 HD(Rev2) Synchronizer $Rev$");
|
||||
Serial.println("For \"$INSTALLATION NAME$\" by $ARTIST$ ($YEAR$)");
|
||||
Serial.println("Code by Joe Foley <foley@ru.is>");
|
||||
Serial.println("$URL$");
|
||||
Serial.println("$Id$");
|
||||
Serial.print("Playtime: ");
|
||||
secs=playtime;
|
||||
Serial.print("sec:");
|
||||
Serial.print(secs);
|
||||
Serial.print(" / mm:ss ");
|
||||
Serial.print(secs/60);
|
||||
Serial.print(":");
|
||||
Serial.print(secs % 60);
|
||||
Serial.println("");
|
||||
|
||||
secs=playtime;
|
||||
Serial << DESCRIPTION << " " << SVN_REVISION << endl;
|
||||
Serial << "Code by " << AUTHOR << endl;
|
||||
Serial << "For \""<< INST_NAME << "\" by "<< ARTIST <<"(" << YEAR << ")" << endl;
|
||||
Serial << SVN_URL << endl << SVN_ID << endl;
|
||||
Serial << "Playtime: " << playtime << endl;
|
||||
sync();
|
||||
showtime(playtime);
|
||||
|
||||
Alarm.timerRepeat(playtime, trigger_sync);
|
||||
send_play();
|
||||
}
|
||||
|
||||
/********************************************************************/
|
||||
void loop() {
|
||||
Serial.println("Sync");
|
||||
//send_pause();
|
||||
//waitsec(2);
|
||||
if (alarm_bell == true) {
|
||||
sync();
|
||||
alarm_bell = false;
|
||||
}
|
||||
heartbeat();
|
||||
}
|
||||
|
||||
void heartbeat() {
|
||||
if (heartbeat_state == 1) {
|
||||
digitalWrite(pinLED, HIGH);
|
||||
heartbeat_state = 0;
|
||||
}
|
||||
else {
|
||||
digitalWrite(pinLED, LOW);
|
||||
heartbeat_state = 1;
|
||||
}
|
||||
Alarm.delay(1000);
|
||||
}
|
||||
|
||||
void sync() {
|
||||
Serial << "Sync" << endl;
|
||||
//send_pause();
|
||||
//waitsec(resetdelay);
|
||||
|
||||
// The three players don't always see the "previous command" so we send it multiple times
|
||||
send_previous();
|
||||
send_previous();
|
||||
send_previous();
|
||||
@@ -62,40 +99,15 @@ void loop() {
|
||||
// Don't send play because previous automatically starts it
|
||||
// If we hit play it will merely pause it.
|
||||
//send_play();
|
||||
|
||||
for(int t = 0; t < playtime; t++) {
|
||||
// This will not give us perfect 1 second timing
|
||||
// but it is good enough for most video applications
|
||||
// The most critical is having everything start at the
|
||||
// same time.
|
||||
Serial.print("sec:");
|
||||
Serial.print(playtime);
|
||||
Serial.print(" / mm:ss ");
|
||||
Serial.print(t/60);
|
||||
Serial.print(":");
|
||||
Serial.print(t % 60);
|
||||
Serial.println("");
|
||||
if (heartbeat == 1) {
|
||||
digitalWrite(pinLED, HIGH);
|
||||
heartbeat = 0;
|
||||
}
|
||||
else {
|
||||
digitalWrite(pinLED, LOW);
|
||||
heartbeat = 1;
|
||||
}
|
||||
delay(1000);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**************************************************************/
|
||||
void waitsec(int sec) {
|
||||
Serial.print("Wait ");
|
||||
Serial.print(sec);
|
||||
Serial.println(" seconds");
|
||||
delay(sec*1000);
|
||||
}
|
||||
|
||||
/**************************************************************/
|
||||
void waitsec(int sec) {
|
||||
Serial << "Wait " << sec << " seconds" << endl;
|
||||
Alarm.delay(sec*1000);
|
||||
}
|
||||
|
||||
/********************************************************************/
|
||||
void send_stop() {
|
||||
|
||||
@@ -1,102 +1,111 @@
|
||||
/* DVD IR Synchronizer for Toshiba SD1091EKE
|
||||
* Code written by Joe Foley <foley@ru.is>
|
||||
* on 2013-09-08
|
||||
const String DESCRIPTION="IR Synchronizer for Philips Toshiba SD1091EKE";
|
||||
const String AUTHOR="Joe Foley <foley@ru.is>";
|
||||
const String SVN_REVISION="$Rev$";
|
||||
const String SVN_URL="$URL$";
|
||||
const String SVN_ID="$Id$";
|
||||
/* Code written by Joe Foley <foley@ru.is> on 2013-09-08
|
||||
*
|
||||
* Requires libraries:
|
||||
* Arduino-IRremote https://github.com/shirriff/Arduino-IRremote
|
||||
* Streaming http://arduiniana.org/libraries/streaming/
|
||||
* Time http://www.pjrc.com/teensy/td_libs_Time.html
|
||||
* TimeAlarms http://www.pjrc.com/teensy/td_libs_TimeAlarms.html
|
||||
*
|
||||
* More codes at http://www.lirc.org/
|
||||
* The compatible remote is SE-R0301
|
||||
* We use the codes for the SE-R0031
|
||||
* http://lirc.sourceforge.net/remotes/toshiba/SE-R0031
|
||||
* Note that this has some similar codes
|
||||
* Instructions http://www.righto.com/2009/08/multi-protocol-infrared-remote-library.html
|
||||
*
|
||||
* Details on the Philips RC6 coding
|
||||
* http://www.pcbheaven.com/userpages/The_Philips_RC6_Protocol/
|
||||
*
|
||||
* The IRremote library uses Pin 3 for the Anode (longer pin)
|
||||
* We have made a ground pin on Pin 4 for the Cathode (shorter pin)
|
||||
*
|
||||
*
|
||||
*/
|
||||
|
||||
#include <IRremote.h>
|
||||
|
||||
int pinGND=4; // Longer leg on the IR LED
|
||||
#include <Streaming.h>
|
||||
#include <Time.h>
|
||||
#include <TimeAlarms.h>
|
||||
// IR LED pin 3 should be the longer leg
|
||||
int pinGND=4; // Shorter leg on the IR LED
|
||||
int pinLED=13; // The heartbeat LED on the board
|
||||
|
||||
int secs;
|
||||
int heartbeat=0;
|
||||
|
||||
int playtime= 1*60+1; // set here your DVD title playtime in sec leave a little extra
|
||||
// Fill this information in so that it will be easy to identify later
|
||||
String INST_NAME="<TITLE>";
|
||||
String ARTIST="<ARTIST>";
|
||||
String YEAR="<YEAR>";
|
||||
int videotime = 1*60+1; // set here your DVD title playtime in seconds
|
||||
int choptime = 3; // how much to chop at the end if the videos are
|
||||
// not exactly the same length
|
||||
int playtime = videotime - choptime;
|
||||
int resetdelay = 3; // seconds from reset to playing from beginning
|
||||
|
||||
IRsend irsend;
|
||||
int alarm_bell = false;
|
||||
int heartbeat_state=0;
|
||||
|
||||
void showtime(int secs) { Serial << "sec:" << secs << " / mm:ss " << secs/60 << ":" << secs % 60 << endl; }
|
||||
void trigger_sync() { alarm_bell = true; }
|
||||
|
||||
void setup() {
|
||||
pinMode(pinGND,OUTPUT);
|
||||
pinMode(pinLED,OUTPUT);
|
||||
Serial.begin(115200);
|
||||
setTime(23,15,16,1,14,14); // set time to 23:15:16 Jan 14 2014
|
||||
|
||||
Serial << DESCRIPTION << " " << SVN_REVISION << endl;
|
||||
Serial << "Code by " << AUTHOR << endl;
|
||||
Serial << "For \""<< INST_NAME << "\" by "<< ARTIST <<"(" << YEAR << ")" << endl;
|
||||
Serial << SVN_URL << endl << SVN_ID << endl;
|
||||
Serial << "Playtime: " << playtime << endl;
|
||||
sync();
|
||||
showtime(playtime);
|
||||
|
||||
Serial.println("Toshiba DVD SD1091EKE Synchronizer $Rev$");
|
||||
Serial.println("For \"$INSTALLATION NAME$\" by $ARTIST$ ($YEAR$)");
|
||||
Serial.println("Code by Joe Foley <foley@ru.is>");
|
||||
Serial.println("$URL$");
|
||||
Serial.println("$Id$");
|
||||
Serial.print("Playtime: ");
|
||||
secs=playtime;
|
||||
Serial.print("sec:");
|
||||
Serial.print(secs);
|
||||
Serial.print(" / mm:ss ");
|
||||
Serial.print(secs/60);
|
||||
Serial.print(":");
|
||||
Serial.print(secs % 60);
|
||||
Serial.println("");
|
||||
|
||||
secs=playtime;
|
||||
|
||||
Alarm.timerRepeat(playtime, trigger_sync);
|
||||
send_play();
|
||||
}
|
||||
|
||||
/********************************************************************/
|
||||
void loop() {
|
||||
Serial.println("Sync");
|
||||
// The DVD player starts playing automatically, so we should pause it
|
||||
send_pause();
|
||||
waitsec(2);
|
||||
if (alarm_bell == true) {
|
||||
sync();
|
||||
alarm_bell = false;
|
||||
}
|
||||
heartbeat();
|
||||
}
|
||||
|
||||
send_previous();
|
||||
// on this model, previous immediately starts playing
|
||||
|
||||
for(int t = 0; t < playtime; t++) {
|
||||
// This will not give us perfect 1 second timing
|
||||
// but it is good enough for most video applications
|
||||
// The most critical is having everything start at the
|
||||
// same time.
|
||||
Serial.print("sec:");
|
||||
Serial.print(playtime);
|
||||
Serial.print(" / mm:ss ");
|
||||
Serial.print(t/60);
|
||||
Serial.print(":");
|
||||
Serial.print(t % 60);
|
||||
Serial.println("");
|
||||
if (heartbeat == 1) {
|
||||
void heartbeat() {
|
||||
if (heartbeat_state == 1) {
|
||||
digitalWrite(pinLED, HIGH);
|
||||
heartbeat = 0;
|
||||
heartbeat_state = 0;
|
||||
}
|
||||
else {
|
||||
digitalWrite(pinLED, LOW);
|
||||
heartbeat = 1;
|
||||
heartbeat_state = 1;
|
||||
}
|
||||
delay(1000);
|
||||
}
|
||||
Alarm.delay(1000);
|
||||
}
|
||||
|
||||
void sync() {
|
||||
Serial << "Sync" << endl;
|
||||
//send_pause();
|
||||
//waitsec(resetdelay);
|
||||
|
||||
// The three players don't always see the "previous command" so we send it multiple times
|
||||
send_previous();
|
||||
send_previous();
|
||||
send_previous();
|
||||
//waitsec(2);
|
||||
// Don't send play because previous automatically starts it
|
||||
// If we hit play it will merely pause it.
|
||||
//send_play();
|
||||
}
|
||||
|
||||
/**************************************************************/
|
||||
void waitsec(int sec) {
|
||||
Serial.print("Wait ");
|
||||
Serial.print(sec);
|
||||
Serial.println(" seconds");
|
||||
delay(sec*1000);
|
||||
}
|
||||
|
||||
/**************************************************************/
|
||||
void waitsec(int sec) {
|
||||
Serial << "Wait " << sec << " seconds" << endl;
|
||||
Alarm.delay(sec*1000);
|
||||
}
|
||||
|
||||
/********************************************************************/
|
||||
// NEC data format: first comes the pre-data bits, then the command code
|
||||
|
||||
@@ -1,89 +1,99 @@
|
||||
/* DVD IR Synchronizer for Toshiba SD590EKE
|
||||
* Code written by Joe Foley <foley@ru.is>
|
||||
* on 2013-09-08
|
||||
const String DESCRIPTION="IR Synchronizer for Philips DVP3142/12";
|
||||
const String AUTHOR="Joe Foley <foley@ru.is>";
|
||||
const String SVN_REVISION="$Rev$";
|
||||
const String SVN_URL="$URL$";
|
||||
const String SVN_ID="$Id$";
|
||||
/* Code written by Joe Foley <foley@ru.is> on 2013-09-08
|
||||
*
|
||||
* Requires libraries:
|
||||
* Arduino-IRremote https://github.com/shirriff/Arduino-IRremote
|
||||
* Streaming http://arduiniana.org/libraries/streaming/
|
||||
* Time http://www.pjrc.com/teensy/td_libs_Time.html
|
||||
* TimeAlarms http://www.pjrc.com/teensy/td_libs_TimeAlarms.html
|
||||
*
|
||||
* IR Remote codes from SE-R0313
|
||||
* http://lirc.sourceforge.net/remotes/toshiba/SE-R0313
|
||||
* Instructions http://www.righto.com/2009/08/multi-protocol-infrared-remote-library.html
|
||||
*
|
||||
* Details on the Philips RC6 coding
|
||||
* http://www.pcbheaven.com/userpages/The_Philips_RC6_Protocol/
|
||||
*
|
||||
* The IRremote library uses Pin 3 for the Anode (longer pin)
|
||||
* We have made a ground pin on Pin 4 for the Cathode (shorter pin)
|
||||
*/
|
||||
|
||||
|
||||
#include <IRremote.h>
|
||||
|
||||
int pinGND=4; // Longer leg on the IR LED
|
||||
#include <Streaming.h>
|
||||
#include <Time.h>
|
||||
#include <TimeAlarms.h>
|
||||
// IR LED pin 3 should be the longer leg
|
||||
int pinGND=4; // Shorter leg on the IR LED
|
||||
int pinLED=13; // The heartbeat LED on the board
|
||||
|
||||
int heartbeat=0;
|
||||
int secs;
|
||||
int playtime= 1*60+1; // set here your DVD title playtime in sec leave a little extra
|
||||
// Fill this information in so that it will be easy to identify later
|
||||
String INST_NAME="<TITLE>";
|
||||
String ARTIST="<ARTIST>";
|
||||
String YEAR="<YEAR>";
|
||||
int videotime = 1*60+1; // set here your DVD title playtime in seconds
|
||||
int choptime = 3; // how much to chop at the end if the videos are
|
||||
// not exactly the same length
|
||||
int playtime = videotime - choptime;
|
||||
int resetdelay = 2; // seconds from reset to playing from beginning
|
||||
|
||||
IRsend irsend;
|
||||
int alarm_bell = false;
|
||||
int heartbeat_state=0;
|
||||
|
||||
void showtime(int secs) { Serial << "sec:" << secs << " / mm:ss " << secs/60 << ":" << secs % 60 << endl; }
|
||||
void trigger_sync() { alarm_bell = true; }
|
||||
|
||||
void setup() {
|
||||
pinMode(pinGND,OUTPUT);
|
||||
pinMode(pinLED,OUTPUT);
|
||||
Serial.begin(115200);
|
||||
setTime(23,15,16,1,14,14); // set time to 23:15:16 Jan 14 2014
|
||||
|
||||
Serial.println("Toshiba DVD SD590EKE Synchronizer $Rev$");
|
||||
Serial.println("For \"$INSTALLATION NAME$\" by $ARTIST$ ($YEAR$)");
|
||||
Serial.println("Code by Joe Foley <foley@ru.is>");
|
||||
Serial.println("$URL$");
|
||||
Serial.println("$Id$");
|
||||
Serial.print("Playtime: ");
|
||||
secs=playtime;
|
||||
Serial.print("sec:");
|
||||
Serial.print(secs);
|
||||
Serial.print(" / mm:ss ");
|
||||
Serial.print(secs/60);
|
||||
Serial.print(":");
|
||||
Serial.print(secs % 60);
|
||||
Serial.println("");
|
||||
|
||||
// The DVD player starts playing automatically, so maybe we should pause it
|
||||
//send_pause();
|
||||
//waitsec(2);
|
||||
secs=playtime;
|
||||
Serial << DESCRIPTION << " " << SVN_REVISION << endl;
|
||||
Serial << "Code by " << AUTHOR << endl;
|
||||
Serial << "For \""<< INST_NAME << "\" by "<< ARTIST <<"(" << YEAR << ")" << endl;
|
||||
Serial << SVN_URL << endl << SVN_ID << endl;
|
||||
Serial << "Playtime: " << playtime << endl;
|
||||
sync();
|
||||
showtime(playtime);
|
||||
|
||||
Alarm.timerRepeat(playtime, trigger_sync);
|
||||
send_play();
|
||||
}
|
||||
|
||||
/********************************************************************/
|
||||
void loop() {
|
||||
Serial.println("Sync");
|
||||
send_pause();
|
||||
waitsec(2);
|
||||
send_previous();
|
||||
//waitsec(2);
|
||||
if (alarm_bell == true) {
|
||||
sync();
|
||||
alarm_bell = false;
|
||||
}
|
||||
heartbeat();
|
||||
}
|
||||
|
||||
//send_play(); // this should not be necessary, but just in case
|
||||
for(int t = 0; t < playtime; t++) {
|
||||
// This will not give us perfect 1 second timing
|
||||
// but it is good enough for most video applications
|
||||
// The most critical is having everything start at the
|
||||
// same time.
|
||||
Serial.print("sec:");
|
||||
Serial.print(playtime);
|
||||
Serial.print(" / mm:ss ");
|
||||
Serial.print(t/60);
|
||||
Serial.print(":");
|
||||
Serial.print(t % 60);
|
||||
Serial.println("");
|
||||
if (heartbeat == 1) {
|
||||
void heartbeat() {
|
||||
if (heartbeat_state == 1) {
|
||||
digitalWrite(pinLED, HIGH);
|
||||
heartbeat = 0;
|
||||
heartbeat_state = 0;
|
||||
}
|
||||
else {
|
||||
digitalWrite(pinLED, LOW);
|
||||
heartbeat = 1;
|
||||
heartbeat_state = 1;
|
||||
}
|
||||
delay(1000);
|
||||
}
|
||||
Alarm.delay(1000);
|
||||
}
|
||||
|
||||
void sync() {
|
||||
Serial << "Sync" << endl;
|
||||
send_pause();
|
||||
waitsec(resetdelay);
|
||||
send_previous();
|
||||
|
||||
//waitsec(2);
|
||||
// Don't send play because previous automatically starts it
|
||||
// If we hit play it will merely pause it.
|
||||
//send_play();
|
||||
}
|
||||
|
||||
/**************************************************************/
|
||||
|
||||
Reference in New Issue
Block a user