added in installation details, copied into installation with new name, filled in new labels and commented out old labels

synchronizer/blu-ray/Sony_BDP_S790/Sony_BDP_S790.pde

@@ -1,7 +1,8 @@
-const string DESCRIPTION="IR Synchronizer for Sony Blu-ray player BDP-S790";
+const String DESCRIPTION="IR Synchronizer for Sony Blu-ray player BDP-S790";
-const string AUTHOR="Joe Foley <foley@ru.is>";
+const String AUTHOR="Joe Foley <foley@ru.is>";
-const string REVISION="$Rev$";
+const String SVN_REVISION="$Rev$";
-const string SVNID="$Id$";
+const String SVN_URL="$URL$";
+const String SVN_ID="$Id$";
 /* Code written by Joe Foley <foley@ru.is> on 2014-01-14
  *
  * Requires libraries:
@@ -24,12 +25,16 @@ int pinGND=4;  // Longer leg on the IR LED
 int pinLED=13; // The heartbeat LED on the board
 
 int secs;
-int heartbeat=0;
+int heartbeat_state=0;
 
-string INST_NAME="<Installation Name>";
+String INST_NAME="Trajectories";
-string ARTIST="<Artist>";
+String ARTIST="Sigurdur Gudjonsson (video) & Anna Thorvaldsdottir (sound)";
-string YEAR="<Year>";
+String YEAR="2014";
-int playtime= 1*60+1;      // set here your DVD title playtime in sec leave a little extra
+int videotime = 14*60+44;    // set here your DVD title playtime in sec
+int choptime = 3;           // how much to chop at the end if the videos are
+                            // not exactly the same length
+int playtime = videotime - choptime;
+int resetdelay = 3;         // seconds from reset to playing from beginning
 
 IRsend irsend;
 
@@ -43,11 +48,11 @@ void setup() {
   Serial.begin(115200);
   setTime(23,15,16,1,14,14); // set time to 23:15:16 Jan 14 2014
 
-  Serial << DESCRIPTION << REVISION << endl;
+  Serial << DESCRIPTION << " " << SVN_REVISION << endl;
   Serial << "Code by " << AUTHOR << endl;
   Serial << "For \""<< INST_NAME << "\" by "<< ARTIST <<"(" << YEAR << ")" << endl;
-  Serial << URL << endl << ID << endl;;
+  Serial << SVN_URL << endl << SVN_ID << endl;
-  Serial << "Playtime: " << endl;
+  Serial << "Playtime: " << playtime << endl;
   secs=playtime;
   showtime();
 
@@ -56,36 +61,36 @@ void setup() {
 
 /********************************************************************/
 void loop() {
-  heartbeat()
+  heartbeat();
 }
 
 void heartbeat() {
-    if (heartbeat == 1) {
+    if (heartbeat_state == 1) {
       digitalWrite(pinLED, HIGH);
-      heartbeat = 0;
+      heartbeat_state = 0;
     }
     else {
       digitalWrite(pinLED, LOW);
-      heartbeat = 1;
+      heartbeat_state = 1;
     }
     Alarm.delay(1000);
 }
 
 void sync() {
   Serial << "Sync" << endl;
-  // The DVD player starts playing automatically, so we should pause it
   send_pause();
-  waitsec(2);
+  waitsec(resetdelay);
 
   send_previous();
-  // on this model, previous immediately starts playing
 
-  for(int t = 0; t < playtime; t++) {
+  /*  for(int t = 0; t < playtime; t++) {
     // This will not give us perfect 1 second timing
     //   but it is good enough for most video applications
     // The most critical is having everything start at the
     //   same time.
     showtime();
+  }
+  */
 }
 
 /**************************************************************/

synchronizer/installations/sync-labels.tex

@@ -40,7 +40,7 @@
 %    \begin{minipage}{75mm}
      \vspace*{0.1in}
 %      {\large #2}\\
-	{\bf #2}\\
+        {\bf #2}\\
       #3
 %    \end{minipage}
     \end{minipage}
@@ -53,7 +53,7 @@
 %    \begin{minipage}{75mm}
      \vspace*{0.1in}
 %      {\large #2}\\
-	{\bf #2}\\
+        {\bf #2}\\
       #3
 %    \end{minipage}
     \end{minipage}
@@ -66,9 +66,10 @@
 %\lab{}{}{}{}
 
 \newcommand{\syncdesigner}{Synchronizer\\by Joe Foley $<$foley@ru.is$>$ +354-661-7658}
-\labnoru{Dawn (6:09)}{By Sigrún Harðar}{Toshiba SD590EKE \syncdesigner}{1986}
+%\labnoru{Dawn (6:09)}{By Sigrún Harðar}{Toshiba SD590EKE \syncdesigner}{1986}
-\labnoru{Sarcity (20:58)}{By Þor Elís}{Philips DVP3142 \syncdesigner}{1981}
+%\labnoru{Sarcity (20:58)}{By Þor Elís}{Philips DVP3142 \syncdesigner}{1981}
-\labnoru{West (25:42)}{By Steina Vasulka}{Toshiba SD1091EKE \syncdesigner}{1983}
+%\labnoru{West (25:42)}{By Steina Vasulka}{Toshiba SD1091EKE \syncdesigner}{1983}
+\labnoru{Trajectories (14:44)}{By Sigurður Guðjónsson (video) \& Anna Thorvaldsdóttir (sound)}{Sony BDP-S790 \syncdesigner}{2014}
 %\input{label-input.tex}
 \end{document}
 

synchronizer/installations/trajectories_sony_bdp_s790/trajectories_sony_bdp_s790.pde

@@ -0,0 +1,132 @@
+const String DESCRIPTION="IR Synchronizer for Sony Blu-ray player BDP-S790";
+const String AUTHOR="Joe Foley <foley@ru.is>";
+const String SVN_REVISION="$Rev$";
+const String SVN_URL="$URL$";
+const String SVN_ID="$Id$";
+/* Code written by Joe Foley <foley@ru.is> on 2014-01-14
+ *
+ * Requires libraries:
+ *  Arduino-IRremote https://github.com/shirriff/Arduino-IRremote
+ *  Streaming http://arduiniana.org/libraries/streaming/
+ * More codes at http://www.lirc.org/
+ * This uses remote Sony RMT-B122P
+ * 
+ *  The IRremote library uses Pin 3 for the Anode (longer pin)
+ *  We have made a ground pin on Pin 4 for the Cathode (shorter pin)
+ * 
+ *
+ */
+
+#include <IRremote.h>
+#include <Streaming.h>
+#include <Time.h>
+#include <TimeAlarms.h>
+int pinGND=4;  // Longer leg on the IR LED
+int pinLED=13; // The heartbeat LED on the board
+
+int secs;
+int heartbeat_state=0;
+
+String INST_NAME="Trajectories";
+String ARTIST="Sigurdur Gudjonsson (video) & Anna Thorvaldsdottir (sound)";
+String YEAR="2014";
+int videotime = 14*60+44;    // set here your DVD title playtime in sec
+int choptime = 3;           // how much to chop at the end if the videos are
+                            // not exactly the same length
+int playtime = videotime - choptime;
+int resetdelay = 3;         // seconds from reset to playing from beginning
+
+IRsend irsend;
+
+void showtime() {
+ Serial << "sec:" << secs << " / mm:ss " << secs/60 << ":" << secs % 60 << endl;
+}
+
+void setup() {
+  pinMode(pinGND,OUTPUT);
+  pinMode(pinLED,OUTPUT);
+  Serial.begin(115200);
+  setTime(23,15,16,1,14,14); // set time to 23:15:16 Jan 14 2014
+
+  Serial << DESCRIPTION << " " << SVN_REVISION << endl;
+  Serial << "Code by " << AUTHOR << endl;
+  Serial << "For \""<< INST_NAME << "\" by "<< ARTIST <<"(" << YEAR << ")" << endl;
+  Serial << SVN_URL << endl << SVN_ID << endl;
+  Serial << "Playtime: " << playtime << endl;
+  secs=playtime;
+  showtime();
+
+  Alarm.timerRepeat(playtime, sync);
+}
+
+/********************************************************************/
+void loop() {
+  heartbeat();
+}
+
+void heartbeat() {
+    if (heartbeat_state == 1) {
+      digitalWrite(pinLED, HIGH);
+      heartbeat_state = 0;
+    }
+    else {
+      digitalWrite(pinLED, LOW);
+      heartbeat_state = 1;
+    }
+    Alarm.delay(1000);
+}
+
+void sync() {
+  Serial << "Sync" << endl;
+  send_pause();
+  waitsec(resetdelay);
+
+  send_previous();
+
+  /*  for(int t = 0; t < playtime; t++) {
+    // This will not give us perfect 1 second timing
+    //   but it is good enough for most video applications
+    // The most critical is having everything start at the
+    //   same time.
+    showtime();
+  }
+  */
+}
+
+/**************************************************************/
+void waitsec(int sec) {
+  Serial << "Wait " << sec << " seconds" << endl;
+  Alarm.delay(sec*1000);
+}
+
+
+/********************************************************************/
+  // NEC data format: first comes the pre-data bits, then the command code
+void send_stop() { 
+    Serial << " stop" << endl;
+    irsend.sendNEC(0xA25D28D7,32); 
+}
+
+/********************************************************************/
+void send_play() { 
+  // Note that play and pause are a toggle for the same command
+  Serial << " play" << endl;
+  irsend.sendNEC(0xA25DA857, 32); 
+
+}
+
+/********************************************************************/
+void send_pause() {
+  // On this model, pause and play are the same button so it toggles
+  // We use the "step" command which will always pause, no matter
+  //   how many times we press it.
+  Serial << "  step/pause" << endl;
+  irsend.sendNEC(0xA25D00FF,32); 
+}	
+
+/********************************************************************/
+void send_previous() {  
+  // First comes the pre-data bits, then the command code
+  Serial.println(" previous");
+  irsend.sendNEC(0xA25DC43B, 32); 
+}