merging sigrun Synchronizer_long_philips into the main branch

dawn/Synchronizer_Long_Philips_DVP3142_12/Synchronizer_Long_Philips_DVP3142_12.pde

@@ -1,135 +0,0 @@
-/* DVD IR Synchronizer for Philips DVP3142/12
- * Developed for Art Installation "Thor"
- * Code written by Joe Foley <foley@ru.is>
- * on 2013-09-08
- *
- *
- * Requires libraries:
- *  Arduino-IRremote https://github.com/shirriff/Arduino-IRremote
- *   Instructions http://www.righto.com/2009/08/multi-protocol-infrared-remote-library.html
- *
- * IR Remote codes  from IRrecvDemo
- *
- *
- * Details on the Philips RC6 coding
- *   http://www.pcbheaven.com/userpages/The_Philips_RC6_Protocol/
- * 
- *  The IRremote library uses Pin 3 for the Anode (longer pin)
- *  We have made a ground pin on Pin 4 for the Cathode (shorter pin)
- */
-
-
-#include <IRremote.h>
-
-int pinGND=4;  // Longer leg on the IR LED
-int pinLED=13; // The heartbeat LED on the board
-
-int heartbeat=0;
-int secs;
-// Sarcity 20:58
-int playtime= 58*44+10;      // Play time in seconds, you usually leave off a second or two
-
-//int  playtime= 10;      // testing
-
-IRsend irsend;
-
-void setup() {
-  pinMode(pinGND,OUTPUT);
-  pinMode(pinLED,OUTPUT);
-  Serial.begin(115200);
-
-  Serial.println("Panasonic DVD DVP-3142/12  Synchronizer $Rev: 29 $");
-  Serial.println("For \"Sarcity\" by Thor Elis (1981)");
-  Serial.println("Code by Joe Foley <foley@ru.is>");
-  Serial.println("$URL: https://svn.ru.is/projects/arduino-art/dawn/Synchronizer_Philips_DVP3142_12/Synchronizer_Philips_DVP3142_12.pde $");
-  Serial.println("$Id: Synchronizer_Philips_DVP3142_12.pde 29 2013-09-13 19:37:53Z foley@ru.is $");
-  Serial.print("Playtime: ");
-  secs=playtime;
-    Serial.print("sec:");
-    Serial.print(secs);
-    Serial.print(" / mm:ss ");
-    Serial.print(secs/60);
-    Serial.print(":");
-    Serial.print(secs % 60);
-    Serial.println("");
-
-  secs=playtime;
-  send_play();
-}
-
-/********************************************************************/
-void loop() {
-  Serial.println("Sync");
-  //send_pause();
-  //waitsec(2);
-
-  // The three players don't always see the "previous command" so we send it multiple times
-  send_previous();
-  send_previous();
-  send_previous();
-  //waitsec(2);      
-  // Don't send play because previous automatically starts it
-  // If we hit play it will merely pause it.
-  //send_play();  
-
-  for(int t = 0; t < playtime; t++) {
-    // This will not give us perfect 1 second timing
-    //   but it is good enough for most video applications
-    // The most critical is having everything start at the
-    //   same time.
-    Serial.print("sec:");
-    Serial.print(playtime);
-    Serial.print(" / mm:ss ");
-    Serial.print(t/60);
-    Serial.print(":");
-    Serial.print(t % 60);
-    Serial.println("");
-    if (heartbeat == 1) {
-      digitalWrite(pinLED, HIGH);
-      heartbeat = 0;
-    }
-    else {
-      digitalWrite(pinLED, LOW);
-      heartbeat = 1;
-    }
-    delay(1000);
-  }
-
-}
-
-/**************************************************************/
-void waitsec(int sec) {
-  Serial.print("Wait ");
-  Serial.print(sec);
-  Serial.println(" seconds");
-  delay(sec*1000);
-}
-
-
-/********************************************************************/
-void send_stop() { 
-  // First comes the pre-data bits, then the command code
-    Serial.println(" stop");
-    irsend.sendRC6(0x10431,20); 
-}
-
-/********************************************************************/
-void send_play() { 
-  // First comes the pre-data bits, then the command code
-    Serial.println(" play");
-    irsend.sendRC6(0x1042C,20); 
-}
-
-/********************************************************************/
-void send_pause() { 
-  // First comes the pre-data bits, then the command code
-  Serial.println("  pause");
-  irsend.sendRC6(0x1042C,20); 
-}	
-
-/********************************************************************/
-void send_previous() {  
-  // First comes the pre-data bits, then the command code
-  Serial.println(" previous");
-  irsend.sendRC6(0x10421, 20); 
-}

dawn/Synchronizer_Philips_DVP3142_12/Synchronizer_Philips_DVP3142_12.pde

@@ -27,7 +27,7 @@ int pinLED=13; // The heartbeat LED on the board
 int heartbeat=0;
 int secs;
 // Sarcity 20:58
-int playtime= 22*60+10;      // Play time in seconds, you usually leave off a second or two
+int playtime= 58*44+10;      // Play time in seconds, you usually leave off a second or two
 
 //int  playtime= 10;      // testing